On Tue Jun 18 13:04:31 2024, the following results were submitted from the "Bismillah Alhamdolillah CV" on dubai-forever.com:
------------------------------
First Name: Ismail Hamzeh Abu nafiseh
E-Mail Address: Isma3eel@hotmail.com
Country: Jordan
Phone: 00962-796605454
Current Job Designation: Head of Electrical Department
Job Designation Applying For: Any
Total Years of Experience: 18
Copy your Resume / CV in this box:
Ismail Abu Nafiseh
Jordanian ▪ isma3eel@hotmail.com ▪ 00962 79 6605454
Address
Amman
Jordan
Profile
Experienced Jordanian MEP Project Manager and Senior Electrical Engineer with over 17 years of expertise in managing and executing diverse electromechanical projects. Seeking a challenging role where I can apply my project management, engineering, and leadership skills to drive successful project outcomes and contribute to organizational growth.
Work ExperienceKildani Engineering and Contracting (KEC) ▪ Amman ▪ Jordan1.MEP project manager
2020 – present
Developed and implemented project schedules, ensuring adherence to deadlines and milestones, resulting in an on-time completion rate of 95%.
Develop comprehensive project plans, including timelines, budgets, and resource allocation to ensure successful project execution
Managed the procurement process, including vendor selection, negotiations, and contract administration, resulting in cost savings of 10% on average per project.
Implement and enforce safety protocols and standards on the project site to ensure the well-being of all team members.
Manage relationships with vendors and suppliers to secure materials and equipment on time and within budget.
Amman ▪ Jordan2.Senior Electrical Engineer
2013 – 2019
Manage electrical engineering projects from inception to completion, including budgeting, resource allocation, and scheduling.
rovide technical guidance and mentorship to junior engineers, assisting them in solving complex electrical engineering challenges.
Implement and maintain quality control processes to ensure the accuracy and reliability of electrical designs and installations.
Stay updated with electrical codes, standards, and regulations, ensuring all designs and installations adhere to safety and compliance requirements.
SAMCO International ▪ Tripoli ▪ LibyaElectrical engineer
08/2010 – 04/2011
Performed engineering and installation for all systems in a commercial facility, specifically the AFRICA TOWER FIVE STARS HOTEL.
Contract Value for Electromechanical Works: EURO 20 million
Supervised, inspected, and monitored various Building Electrical Installation Works, including power, lighting, fire alarm, low current systems (data, CCTV, telephone, Voice, and special cables), earthling system, and lightning protection system.
Verified shop drawings and material submittals to ensure compliance with specifications.
Ensured contractor's adherence to specifications by actively monitoring and addressing any deviations.
Conducted quality assurance of executed work through comprehensive testing and inspection processes.
Kamal Abbassi & Sons Co ▪ Amman ▪ JordanSr. Project engineer(Electrical)
2006 – 2010
Spearheaded the design, supervision, testing, and commissioning of fire alarm and voice evacuation systems for diverse projects encompassing 5-star hotels, hospitals, and industrial facilities
Executed engineering and installation activities for fire systems in industrial, commercial, educational, and correctional facilities
Ensured seamless project follow-up and handover processes
Strategized and developed business plans to drive growth and expansion
Led a high-performing team in successfully maintaining a majority of completed projects.
Key Projects
1.Abdali Gateway Project
Location: Al-Abdali New Downtown of Amman
Description: Managed electromechanical works for a commercial tower of 21 floors and two commercial buildings of 8 floors each, totaling 100,000 m2.
Contract Value: J.D 9 million (2013-2016)
2.Karak Dam Project
Location: Karak, Jordan
Description: Led a dam project for the Ministry of Water and Irrigation.
Duration: 2016-2018
3.Albashir Hospitals Negative Pressure Rooms Project
Description: Successfully completed the project as a Project Manager.
Duration: 2021-2022
4.Rehabilitation of Fire Alarm & Fire Fighting Systems at Al-Bashir Hospitals
Description: Currently managing the project as a Project Manager.
Duration: 2023-Present
Skills
Project Management
Electrical Engineering
MEP Systems
Quality Assurance
Team Leadership
Budgeting and Cost Control
Technical Documentation
AutoCAD
EducationArab academy for science technology and maritime transport ▪ Alexandria ▪ EgyptBachelor's
2006
New York Institute of Technology (NYIT) ▪ New York ▪ United StatesDiploma
2010
QC-PMP-risk management-environmenta
------------------------------
Best regards,
Shabbir Kagalwala
dubai-forever.com
------------------------------
P.S. Also included is the user's IP address below, which we detect at the time the user submits the form. This verifies that each submission is from a unique visitor. Here it is...
79.134.143.63 (Jordan)
------------------------------
Showing posts with label Engineering. Show all posts
Showing posts with label Engineering. Show all posts
Quality Control Chemist
On Wed Mar 27 13:18:04 2024, the following results were submitted from the "Bismillah Alhamdolillah CV" on dubai-forever.com:
------------------------------
First Name: AMALNA CH
E-Mail Address: amalnach21@gmail.com
Country: United Arab Emirates
Phone: +971 58 880 4678
Job Position Applying For: Quality Control Chemist
Current Job Title: Quality Control Chemist
Total Years of Experience: 1
Copy your Resume / CV in this box: Proficient in HPLC, UV Visible
Spectrophotometer, GC-MS, AAS,
and Protein Analyzer.
Expertise in food and water
analysis.
Strong adherence to Good
Laboratory Practice (GLP).
Quality control
Documentation
Standard Operating Procedures
Batch identification and
traceability
Titration
Gravimetry
Quality Assurance
Chemsketch
MS Office
Quality Control Chemist
AMALNA CH
Experienced Quality Controller with an MSc
in Chemistry, dedicated to maintaining high
standards of product quality, safety, and
regulatory compliance in chemical
manufacturing. Skilled in inspection, data
analysis, and corrective actions to ensure
top-notch quality. Known for attention to
detail and a strong commitment to
excellence.
Chemist Trainee - Biogenic Labs
November 2023- January 2024
Biogenic labs is a NABL Accredited food and
water analysis laboratory in India
amalnach21@gmail.com
+971 58 880 4678
Dubai, United Arab Emirates
Husband Visa
SKILLS
CONTACT
RELEVANT EXPERIENCE
Operated and maintained sophisticated
instruments, including HPLC, UV Visible
Spectrophotometer, GC-MS, AAS, and Protein
Analyzer.
Conducted comprehensive food and water
analysis.
Executed pH, alkalinity, acidity, and hardness
determinations for given samples.
Performed chloride determination using
Argentometric titration.
Analyzed Sodium, Sulphate, Phosphate, Nitrite,
and conducted extraction and analysis of
Curcumin using UV Visible Spectrophotometer.
Determined COD (Chemical Oxygen Demand)
for given samples
Analyzed metals such as Iron, Sodium, Copper
using AAS.
Conducted Caffeine content analysis in Tea
samples, Preservatives in food, and Histamine in
marine food samples using HPLC.
MSc in Chemistry - 87.4%
Mahatma Gandhi University, India
2020-2022
MSc
Synthesis, Characterization &
Antibacterial Application of
ZnO/GO Nanocomposite
Post Graduate Training Course in
Analytical Chemistry and
Sophisticated Instruments
DCA - Diploma In Computer
Application
BSc
Synthesis Of Copper Nanoparticles
Supported Onto Montmorillonite Clay
BSc in Chemistry - 90.6%
Mahatma Gandhi University, India
2017-2020
EDUCATION BACKGROUND
PROJECT
CERTIFICATE
Collaborated with Production Teams to Resolve
Quality Issues.
Worked Under EN-ISO 13485:2016 Standard
Developed Training Programs to Enhance
Product Quality Awareness
Sterilisation Monitoring
Handling of Non-Conforming Raw Materials,
inprocess or Finished Goods
Handling of Sales Return Products
Issuance of CoA
Customer Complaint and Root Cause Analysis
CoA Collection and Documentation of All
Incoming Raw Materials
Sampling
Incoming Inspection of Raw Materials, Packing
Materials, Sub Contracted Items with Proper
Documentation
Inprocess Inspection
Daily Documentation (Personal Hygiene
Checklist, Temperature and Humidity Checklist,
BMR Verification)
Biological Indicator Incubation & Issuance
Identification and Traceability of Raw Materials,
Semi-Finished Goods and Finished Goods
Quality Control Chemist
New Care Hygiene Solutions Pvt Ltd
February 2023 - October 2023
Company in South India specializing in medical
consumables and theatre disposables.
Executed nutritional analysis of food items
Determined moisture, Total Ash, Fat, Protein, and
carbohydrate content
Identified rancidity in oils
Maintained Good Laboratory Practice (GLP)
standards.
Conducted the separation of organic
compounds.
Identified and quantified components in
pesticides using GC-MS
UV Visible Spectrophotometer
Atomic Absorption Spectrometer
High-Performance Liquid
Chromatography
Gas Chromatography-Mass
Spectrometry
Protein Analyzer
pH and Conductivity meter
INSTRUMENTS
------------------------------
Best regards,
Shabbir Kagalwala
dubai-forever.com
------------------------------
P.S. Also included is the user's IP address below, which we detect at the time the user submits the form. This verifies that each submission is from a unique visitor. Here it is...
92.97.133.54 (United Arab Emirates)
------------------------------
------------------------------
First Name: AMALNA CH
E-Mail Address: amalnach21@gmail.com
Country: United Arab Emirates
Phone: +971 58 880 4678
Job Position Applying For: Quality Control Chemist
Current Job Title: Quality Control Chemist
Total Years of Experience: 1
Copy your Resume / CV in this box: Proficient in HPLC, UV Visible
Spectrophotometer, GC-MS, AAS,
and Protein Analyzer.
Expertise in food and water
analysis.
Strong adherence to Good
Laboratory Practice (GLP).
Quality control
Documentation
Standard Operating Procedures
Batch identification and
traceability
Titration
Gravimetry
Quality Assurance
Chemsketch
MS Office
Quality Control Chemist
AMALNA CH
Experienced Quality Controller with an MSc
in Chemistry, dedicated to maintaining high
standards of product quality, safety, and
regulatory compliance in chemical
manufacturing. Skilled in inspection, data
analysis, and corrective actions to ensure
top-notch quality. Known for attention to
detail and a strong commitment to
excellence.
Chemist Trainee - Biogenic Labs
November 2023- January 2024
Biogenic labs is a NABL Accredited food and
water analysis laboratory in India
amalnach21@gmail.com
+971 58 880 4678
Dubai, United Arab Emirates
Husband Visa
SKILLS
CONTACT
RELEVANT EXPERIENCE
Operated and maintained sophisticated
instruments, including HPLC, UV Visible
Spectrophotometer, GC-MS, AAS, and Protein
Analyzer.
Conducted comprehensive food and water
analysis.
Executed pH, alkalinity, acidity, and hardness
determinations for given samples.
Performed chloride determination using
Argentometric titration.
Analyzed Sodium, Sulphate, Phosphate, Nitrite,
and conducted extraction and analysis of
Curcumin using UV Visible Spectrophotometer.
Determined COD (Chemical Oxygen Demand)
for given samples
Analyzed metals such as Iron, Sodium, Copper
using AAS.
Conducted Caffeine content analysis in Tea
samples, Preservatives in food, and Histamine in
marine food samples using HPLC.
MSc in Chemistry - 87.4%
Mahatma Gandhi University, India
2020-2022
MSc
Synthesis, Characterization &
Antibacterial Application of
ZnO/GO Nanocomposite
Post Graduate Training Course in
Analytical Chemistry and
Sophisticated Instruments
DCA - Diploma In Computer
Application
BSc
Synthesis Of Copper Nanoparticles
Supported Onto Montmorillonite Clay
BSc in Chemistry - 90.6%
Mahatma Gandhi University, India
2017-2020
EDUCATION BACKGROUND
PROJECT
CERTIFICATE
Collaborated with Production Teams to Resolve
Quality Issues.
Worked Under EN-ISO 13485:2016 Standard
Developed Training Programs to Enhance
Product Quality Awareness
Sterilisation Monitoring
Handling of Non-Conforming Raw Materials,
inprocess or Finished Goods
Handling of Sales Return Products
Issuance of CoA
Customer Complaint and Root Cause Analysis
CoA Collection and Documentation of All
Incoming Raw Materials
Sampling
Incoming Inspection of Raw Materials, Packing
Materials, Sub Contracted Items with Proper
Documentation
Inprocess Inspection
Daily Documentation (Personal Hygiene
Checklist, Temperature and Humidity Checklist,
BMR Verification)
Biological Indicator Incubation & Issuance
Identification and Traceability of Raw Materials,
Semi-Finished Goods and Finished Goods
Quality Control Chemist
New Care Hygiene Solutions Pvt Ltd
February 2023 - October 2023
Company in South India specializing in medical
consumables and theatre disposables.
Executed nutritional analysis of food items
Determined moisture, Total Ash, Fat, Protein, and
carbohydrate content
Identified rancidity in oils
Maintained Good Laboratory Practice (GLP)
standards.
Conducted the separation of organic
compounds.
Identified and quantified components in
pesticides using GC-MS
UV Visible Spectrophotometer
Atomic Absorption Spectrometer
High-Performance Liquid
Chromatography
Gas Chromatography-Mass
Spectrometry
Protein Analyzer
pH and Conductivity meter
INSTRUMENTS
------------------------------
Best regards,
Shabbir Kagalwala
dubai-forever.com
------------------------------
P.S. Also included is the user's IP address below, which we detect at the time the user submits the form. This verifies that each submission is from a unique visitor. Here it is...
92.97.133.54 (United Arab Emirates)
------------------------------
Production Manager
On Mon Apr 01 07:38:53 2024, the following results were submitted from the "Bismillah Alhamdolillah CV" on dubai-forever.com:
------------------------------
First Name: Pankaj Kumar Singh
E-Mail Address: PINKPANKAJ32@GMAIL.COM
Country: India
Phone: +919523130719
Job Position Applying For: Production Manager/Procurement/Maintenance
Current Job Title: Production Manager
Total Years of Experience: 15
Copy your Resume / CV in this box: PANKAJ KUMAR SINGH
Mechanical Engineer (+15 Years of Experience)
Doha, Qatar | +91 9523130719, +974 77821777 | pinkpankaj32@gmail.com | Indian
Professional Summary
Manufacturing and maintenance professional skilled in leading high-producing
teams and using lean manufacturing to reduce costs and increase process
efficiency. Capable of matching workers to optimal positions, improving
performance and maintaining compliance with company standards in high-volume
production settings. Well-versed in training, equipping and motivating team
members to optimize productivity and achieve organisational objectives.
Skills
Soft Skills:
Analytical Thinking
Problem Solving
Communication
Leadership
Organizational
Teamwork
Time Management
Decision Making
Adaptability
Conflict Resolution
Hard Skills:
Budgeting
Team Management
Risk Assessment
Process Improvement
Vendor Relations
Performance Evaluation
Resource Allocation
Strategic Planning
Compliance Monitoring
Data Analysis
Machine & Materials Procurements (Specially
Cr-Ni alloys for drill collar Oil & gas
Work History
Production Manager
Bin Al Sheikh Holding (Rebar Steel Division - Hot Rolling Mill)
Doha, Qatar
08/2010 - 10/2023
1. Production Planning and Scheduling: Develop production schedules and plans to ensure
timely manufacturing of steel products according to customer demands and quality
standards. Coordinate with sales, logistics, and other departments to meet production
targets.
2. Process Optimization: Continuously review and optimize production processes to improve
efficiency, reduce waste, and enhance product quality. Implement best practices and
innovative techniques to maximize output while minimizing costs.
3. Quality Assurance: Establish and enforce quality control procedures to ensure that steel
products meet industry standards and customer specifications. Conduct regular inspections
and audits to identify and address quality issues promptly.
4. Equipment Maintenance and Repair: Oversee maintenance activities for rolling mill
equipment, including preventive maintenance schedules, troubleshooting, and repairs.
Ensure that machinery and tools are properly maintained to minimize downtime and
maximize productivity.
5. Safety and Compliance: Implement safety protocols and procedures to maintain a safe
working environment for all employees. Ensure compliance with regulatory requirements
and industry standards related to occupational health and safety.
6. Team Leadership and Training: Provide leadership and guidance to production staff,
including supervisors, operators, and technicians. Foster a culture of teamwork,
accountability, and continuous improvement. Provide training and development
opportunities to enhance employee skills and performance.
7. Inventory Management: Manage inventory levels of raw materials, semi-finished products,
and finished goods to support production schedules and customer orders. Coordinate with
procurement and logistics teams to optimize inventory levels and minimize stockouts.
8. Performance Monitoring and Reporting: Monitor production metrics and key performance
indicators (KPIs) to track progress against goals and identify areas for improvement. Prepare
regular reports and presentations for senior management on production performance,
efficiency, and cost control. Controlled resources by department or project and tracked use
in SAP.
9. Customer Relations: Collaborate with sales and customer service teams to address
customer inquiries, resolve issues, and ensure customer satisfaction. Communicate
production capabilities, lead times, and other relevant information to customers as needed.
10. Continuous Improvement Initiatives: Lead or participate in continuous improvement
projects aimed at enhancing production processes, reducing costs, and increasing
profitability. Encourage employee involvement in problem-solving and idea generation to
drive innovation and efficiency gains.
By effectively managing these responsibilities, as Steel Rolling Mill Production Manager
contributes to the success and competitiveness of the steel manufacturing operation.
Production Engineer
Kalliyath Developers Pvt. Ltd. Kochi - Kerela India
08/2007 - 04/2010
Drew up production schedules and budgets for projects. Maintain a safe and clean
work environment for all employees.
Performed Poka Yoke (error proofing) where possible to prevent errors.
Installed and modified equipment to fulfill production goals. In a timely manner
without continuous overtime.
Carried out Total Productive Maintenance (TPM) to achieve high performance levels.
Carried out Failure Mode Effects Analysis (FMEAs), processed documentation and
implemented improvements.
Researched new manufacturing methods to drive efficiencies. Planned staff and
materials costs to meet production schedules. Produced reports and presented
progress at project meetings and to clients.
Established safety procedures and protocols for workers safety and to minimize
carbon footprint.
Conducted fault finding and diagnostics on complex systems. Organized plant start-up
and shut-down schedules to minimize loss of production time.
Ensure quality of all products is constantly monitored.
Ensure all employees are performing job duties in a safe manner and ensure work
environment is organized and free of hazards Ensures that the workplace is safe and
in compliance with OSHA regulations and applicable fire codes.
Identify areas of cost savings, efficiencies, and quality of product manufacturing
based on observations and evaluations of products lines
Generation of Bar Bending Schedule & Optimization with the help of
ARMAOR Software to minimize the wastage/scrap
0 007
Improved profit margins by 5% while reducing quality defect losses by 15%
Finding profitable resources of raw materials & Spare parts.
Construction Projects Accomplishments (QATAR, Doha)
1. CBQ BANK @ AL WAKRAH
2. OFFICE BUILDING @ CORNICH (COMMODER QATAR)
3. NDIA PACKAGE-61 (NEW DOHA INTERNATIONAL AIRPORT OPERATION FACILITIES)
4. NDIA PACKAGE-65 (NEW DOHA INTERNATIONAL AIRPORT OPERATION FACILITIES)
5. CBQ BANK @ AL KHERTIAT (AMAAR CONSTRUCTION)
6. CBQ BANK @ AL MESSILA (AMAAR CONSTRUCTION)
7. 03 NEW SCHOOL @ AL WAKRAH (GULF CONTRACTING)
8. ALI SHERIF VILLA @ PEARL QATAR (AMAAR CONSTRUCTION)
9. MEEZA MV2 @ QATAR FOUNDATION (HARINSA CONSTRUCTION)
10. QATAR NATIONAL MUSEUM (HYUNDAI ENGINEERING)
11. LEKHWIYA SPORT CITY (AL KHAYYAT)
12. SWISS BORING (PILE CAGES @ VARIES LOCATIONS)
13. TALEB SHAHWANI VILLA @ AL MESSILA (AL KHAYYAT)
14. UPGRADING/EXTENSION MUNTAZAH STREET (TUNNEL,FLYOVER,INTERCHANGE)
15. QATAR NATIONAL MUSEUM (HYUNDAI ENGINEERING)
16. HEALTH AND WELLNESS CENTER (DOMOPAN ETA JV)
17. RESIDETAIL BUILDING 2B+G+7 (MONTERIAL CONSTRUCTION)
18. COMMERCIAL PLAZA AND CHILDREN MALL – KATARA (ITCC)
19. ISF-CAMP (QD-SBG JV)
20. DOHA METRO-Red Line North Elevated
21. DOHA METRO RED & GREEN LINE DEPOT
1. CUT AND BENT REINFORCEMENT
2. RE-BAR IN COILS AND RE-BAR IN BARS
3. PREFABRICATED REINFORCEMENT ELEMENTS
4. THREAD RE-BAR JOINTS
5. STEEL MESHES
Education
Bachelor of Engineering: Mechanical Engineering,
Rajiv Gandhi Proudyogiki Vishwavidyalaya University - Bhopal, India
Academic Projects :
Minor Project 1. - Study of Material Handling.
Minor Project 2. - Study of Tubular Heat Ex-changer.
Major Project- P.C. Controlled Rover
Professional Training
05/2003 - 06/2007
Bokaro Steel Plant (Steel Authority of India Limited) Production & maintenance
training.
NSIC - Chennai, job oriented training "Machine Tool Technologist".(with CNC
programming & operation. CAD/CAM using I-DEAS )
OSCAM (Italia) Shearing & Bending (REBAR) Training with Electro-Mechanical
machines.
Summarized overall experience in Reinforcement/Rebars
·Ø 8 - Ø40 grade BS4449:2005 B500B (Qatar Steel)
·Ø 12- Ø40 grade ASTM A615 Grade 60 (Qatar Steel)
·Coils : Ø8, Ø10, Ø12, Ø14 , Ø16 grade BS4449:2005 B500B/ ASTM A615 Grade 60
·Re-bar : Ø 8 - Ø40 grade BS4449:2005 B500B
·Ø 12- Ø40 grade ASTM A615 Grade 60
Cages for d-walls.
Reinforcement for piles.
Other spatial elements: retaining walls, columns, lintels.
Lenton and Dextra coupling systems.
DTR, BARTEC TYPE, COLD PRESS REBAR coupling systems.
Wire diameters: from 5.0 to 12.0 (mm)
Maximum mesh dimensions: 2,400 x 6,000 (mm)
Mesh: 100 x 100 (mm), 150 x 150 (mm), 200 x 200 (mm)
Steel grade: B500A, ductility class A, yield strength = Re 500 MPa
Custom meshes
Language Driving License
Hindi (Native)
English (Advance)
Arabic(Intermediate)
India LMV driving license
Qatar LMV driving license
(International DL)
------------------------------
Best regards,
Shabbir Kagalwala
dubai-forever.com
------------------------------
P.S. Also included is the user's IP address below, which we detect at the time the user submits the form. This verifies that each submission is from a unique visitor. Here it is...
106.221.240.236 (India)
------------------------------
------------------------------
First Name: Pankaj Kumar Singh
E-Mail Address: PINKPANKAJ32@GMAIL.COM
Country: India
Phone: +919523130719
Job Position Applying For: Production Manager/Procurement/Maintenance
Current Job Title: Production Manager
Total Years of Experience: 15
Copy your Resume / CV in this box: PANKAJ KUMAR SINGH
Mechanical Engineer (+15 Years of Experience)
Doha, Qatar | +91 9523130719, +974 77821777 | pinkpankaj32@gmail.com | Indian
Professional Summary
Manufacturing and maintenance professional skilled in leading high-producing
teams and using lean manufacturing to reduce costs and increase process
efficiency. Capable of matching workers to optimal positions, improving
performance and maintaining compliance with company standards in high-volume
production settings. Well-versed in training, equipping and motivating team
members to optimize productivity and achieve organisational objectives.
Skills
Soft Skills:
Analytical Thinking
Problem Solving
Communication
Leadership
Organizational
Teamwork
Time Management
Decision Making
Adaptability
Conflict Resolution
Hard Skills:
Budgeting
Team Management
Risk Assessment
Process Improvement
Vendor Relations
Performance Evaluation
Resource Allocation
Strategic Planning
Compliance Monitoring
Data Analysis
Machine & Materials Procurements (Specially
Cr-Ni alloys for drill collar Oil & gas
Work History
Production Manager
Bin Al Sheikh Holding (Rebar Steel Division - Hot Rolling Mill)
Doha, Qatar
08/2010 - 10/2023
1. Production Planning and Scheduling: Develop production schedules and plans to ensure
timely manufacturing of steel products according to customer demands and quality
standards. Coordinate with sales, logistics, and other departments to meet production
targets.
2. Process Optimization: Continuously review and optimize production processes to improve
efficiency, reduce waste, and enhance product quality. Implement best practices and
innovative techniques to maximize output while minimizing costs.
3. Quality Assurance: Establish and enforce quality control procedures to ensure that steel
products meet industry standards and customer specifications. Conduct regular inspections
and audits to identify and address quality issues promptly.
4. Equipment Maintenance and Repair: Oversee maintenance activities for rolling mill
equipment, including preventive maintenance schedules, troubleshooting, and repairs.
Ensure that machinery and tools are properly maintained to minimize downtime and
maximize productivity.
5. Safety and Compliance: Implement safety protocols and procedures to maintain a safe
working environment for all employees. Ensure compliance with regulatory requirements
and industry standards related to occupational health and safety.
6. Team Leadership and Training: Provide leadership and guidance to production staff,
including supervisors, operators, and technicians. Foster a culture of teamwork,
accountability, and continuous improvement. Provide training and development
opportunities to enhance employee skills and performance.
7. Inventory Management: Manage inventory levels of raw materials, semi-finished products,
and finished goods to support production schedules and customer orders. Coordinate with
procurement and logistics teams to optimize inventory levels and minimize stockouts.
8. Performance Monitoring and Reporting: Monitor production metrics and key performance
indicators (KPIs) to track progress against goals and identify areas for improvement. Prepare
regular reports and presentations for senior management on production performance,
efficiency, and cost control. Controlled resources by department or project and tracked use
in SAP.
9. Customer Relations: Collaborate with sales and customer service teams to address
customer inquiries, resolve issues, and ensure customer satisfaction. Communicate
production capabilities, lead times, and other relevant information to customers as needed.
10. Continuous Improvement Initiatives: Lead or participate in continuous improvement
projects aimed at enhancing production processes, reducing costs, and increasing
profitability. Encourage employee involvement in problem-solving and idea generation to
drive innovation and efficiency gains.
By effectively managing these responsibilities, as Steel Rolling Mill Production Manager
contributes to the success and competitiveness of the steel manufacturing operation.
Production Engineer
Kalliyath Developers Pvt. Ltd. Kochi - Kerela India
08/2007 - 04/2010
Drew up production schedules and budgets for projects. Maintain a safe and clean
work environment for all employees.
Performed Poka Yoke (error proofing) where possible to prevent errors.
Installed and modified equipment to fulfill production goals. In a timely manner
without continuous overtime.
Carried out Total Productive Maintenance (TPM) to achieve high performance levels.
Carried out Failure Mode Effects Analysis (FMEAs), processed documentation and
implemented improvements.
Researched new manufacturing methods to drive efficiencies. Planned staff and
materials costs to meet production schedules. Produced reports and presented
progress at project meetings and to clients.
Established safety procedures and protocols for workers safety and to minimize
carbon footprint.
Conducted fault finding and diagnostics on complex systems. Organized plant start-up
and shut-down schedules to minimize loss of production time.
Ensure quality of all products is constantly monitored.
Ensure all employees are performing job duties in a safe manner and ensure work
environment is organized and free of hazards Ensures that the workplace is safe and
in compliance with OSHA regulations and applicable fire codes.
Identify areas of cost savings, efficiencies, and quality of product manufacturing
based on observations and evaluations of products lines
Generation of Bar Bending Schedule & Optimization with the help of
ARMAOR Software to minimize the wastage/scrap
0 007
Improved profit margins by 5% while reducing quality defect losses by 15%
Finding profitable resources of raw materials & Spare parts.
Construction Projects Accomplishments (QATAR, Doha)
1. CBQ BANK @ AL WAKRAH
2. OFFICE BUILDING @ CORNICH (COMMODER QATAR)
3. NDIA PACKAGE-61 (NEW DOHA INTERNATIONAL AIRPORT OPERATION FACILITIES)
4. NDIA PACKAGE-65 (NEW DOHA INTERNATIONAL AIRPORT OPERATION FACILITIES)
5. CBQ BANK @ AL KHERTIAT (AMAAR CONSTRUCTION)
6. CBQ BANK @ AL MESSILA (AMAAR CONSTRUCTION)
7. 03 NEW SCHOOL @ AL WAKRAH (GULF CONTRACTING)
8. ALI SHERIF VILLA @ PEARL QATAR (AMAAR CONSTRUCTION)
9. MEEZA MV2 @ QATAR FOUNDATION (HARINSA CONSTRUCTION)
10. QATAR NATIONAL MUSEUM (HYUNDAI ENGINEERING)
11. LEKHWIYA SPORT CITY (AL KHAYYAT)
12. SWISS BORING (PILE CAGES @ VARIES LOCATIONS)
13. TALEB SHAHWANI VILLA @ AL MESSILA (AL KHAYYAT)
14. UPGRADING/EXTENSION MUNTAZAH STREET (TUNNEL,FLYOVER,INTERCHANGE)
15. QATAR NATIONAL MUSEUM (HYUNDAI ENGINEERING)
16. HEALTH AND WELLNESS CENTER (DOMOPAN ETA JV)
17. RESIDETAIL BUILDING 2B+G+7 (MONTERIAL CONSTRUCTION)
18. COMMERCIAL PLAZA AND CHILDREN MALL – KATARA (ITCC)
19. ISF-CAMP (QD-SBG JV)
20. DOHA METRO-Red Line North Elevated
21. DOHA METRO RED & GREEN LINE DEPOT
1. CUT AND BENT REINFORCEMENT
2. RE-BAR IN COILS AND RE-BAR IN BARS
3. PREFABRICATED REINFORCEMENT ELEMENTS
4. THREAD RE-BAR JOINTS
5. STEEL MESHES
Education
Bachelor of Engineering: Mechanical Engineering,
Rajiv Gandhi Proudyogiki Vishwavidyalaya University - Bhopal, India
Academic Projects :
Minor Project 1. - Study of Material Handling.
Minor Project 2. - Study of Tubular Heat Ex-changer.
Major Project- P.C. Controlled Rover
Professional Training
05/2003 - 06/2007
Bokaro Steel Plant (Steel Authority of India Limited) Production & maintenance
training.
NSIC - Chennai, job oriented training "Machine Tool Technologist".(with CNC
programming & operation. CAD/CAM using I-DEAS )
OSCAM (Italia) Shearing & Bending (REBAR) Training with Electro-Mechanical
machines.
Summarized overall experience in Reinforcement/Rebars
·Ø 8 - Ø40 grade BS4449:2005 B500B (Qatar Steel)
·Ø 12- Ø40 grade ASTM A615 Grade 60 (Qatar Steel)
·Coils : Ø8, Ø10, Ø12, Ø14 , Ø16 grade BS4449:2005 B500B/ ASTM A615 Grade 60
·Re-bar : Ø 8 - Ø40 grade BS4449:2005 B500B
·Ø 12- Ø40 grade ASTM A615 Grade 60
Cages for d-walls.
Reinforcement for piles.
Other spatial elements: retaining walls, columns, lintels.
Lenton and Dextra coupling systems.
DTR, BARTEC TYPE, COLD PRESS REBAR coupling systems.
Wire diameters: from 5.0 to 12.0 (mm)
Maximum mesh dimensions: 2,400 x 6,000 (mm)
Mesh: 100 x 100 (mm), 150 x 150 (mm), 200 x 200 (mm)
Steel grade: B500A, ductility class A, yield strength = Re 500 MPa
Custom meshes
Language Driving License
Hindi (Native)
English (Advance)
Arabic(Intermediate)
India LMV driving license
Qatar LMV driving license
(International DL)
------------------------------
Best regards,
Shabbir Kagalwala
dubai-forever.com
------------------------------
P.S. Also included is the user's IP address below, which we detect at the time the user submits the form. This verifies that each submission is from a unique visitor. Here it is...
106.221.240.236 (India)
------------------------------
Mechanical Engineer, Production Incharge, Supervisor
------------------------------
First Name: Muhammad Mehtab Ullah
E-Mail Address: mehtabullah025@gmail.com
Country: Pakistan
Phone: +923037782423
Job Position Applying For: Mechanical Engineer, Production Incharge, Supervisor
Current Job Title: Production Incharge
Total Years of Experience: 2.6 years
Copy your Resume / CV in this box: I am working in FB bolts as a production Incharge.
------------------------------
First Name: Muhammad Mehtab Ullah
E-Mail Address: mehtabullah025@gmail.com
Country: Pakistan
Phone: +923037782423
Job Position Applying For: Mechanical Engineer, Production Incharge, Supervisor
Current Job Title: Production Incharge
Total Years of Experience: 2.6 years
Copy your Resume / CV in this box: I am working in FB bolts as a production Incharge.
------------------------------
Electronic Engineer /Solution Engineer /Sales Engineer
First Name: Salman Aziz
E-Mail Address: salmanaziz1857@gmail.com
Country: Pakistan
Phone: 03106051234
Job Position Applying For: Electronic Engineer/Solution Engineer/Sales Engineer
Current Job Title: Solution and Technical Sales Engineer
Total Years of Experience: +01
Copy your Resume / CV in this box: ABOUT ME
Electronic Engineer with Overall 1-Year Work Experience. Seeking To Find The Opportunity To Work In A
Fun And Challenging Environment That Will Help To Improve And Learn New Skills.
Hands-on in Project Management, Product sourcing, Technical Documentation, Pre-Sales, Customer
Interaction, Customer Training, System Integration, IoT Solution Research.
WORK EXPERIENCE
Solar Energy Engineer
AceTech Solutions LLC [ 3 Mar 2022 – 2 Apr 2022 ]
City: Lahore
Country: Pakistan
As a Solar Energy Engineer:
• Worked closely with Sales and Engineering teams to offer solutions for domestic project.
• Communicated with vendors and subcontractors throughout project development and
implementation.
• Assisted Performance Assurance group with system performance monitoring.
• Visited job sites for project development, installation progress, punch-outs, etc.
Solution Engineer
TekWorx [ 1 Aug 2022 – Current ]
City: Islamabad
Country: Pakistan
• Interface with customers and identify their problems
• Research advanced technology regarding best practices in the field
• Research partner companies to increase product portfolio
• Prepare and submit RFQs and bid documents
• Generate quotes, calculation sheets and technical reports
• Manage equipment trials with government agencies
• Deliver product demos and presentations to clients
• Prepare technical notes, brochures and marketing material
• Customer coordination for projects and sales visits
Trainee Engineer
Turnotech [ 1 Jul 2020 – 21 Jul 2020 ]
City: Multan
Country: Pakistan
As an RF Drive Test Engineer got Accustomed to Assessment of Installed Networks, Monitoring
System & Test activities to Ensure Proper Functioning of RF Circuits and Systems.
Salman Aziz
Nationality: Pakistani Date of birth: 17 Aug 1997 Phone number: (+92) 3106051234
Email address: salmanaziz1857@gmail.com
Home: 8 Kassi, Tehsil Kabirwala District Khanewal, Punjab, 58100 Khanewal (Pakistan)
1 / 2
EDUCATION AND TRAINING
B.sc Electronic Engineering
The Islamia University of Bahawalpur [ 3 Oct 2016 – 2 Oct 2021 ]
Address: Department of Electronic Engineering, Faculty of Engineering, Bahawapur (Pakistan)
Internship
Pakistan Telecommunication Company Ltd. [ 15 Jul 2019 – 25 Sep 2019 ]
Address: PTCL Central Exchange, Multan (Pakistan)
Field(s) of study: Information and Communication Technologies
Gained Experience of Overall Monitoring of Wireless Network, Maintenance of BTS outage and
Supervision of BSC's, DRS Network
LANGUAGE SKILLS
Mother tongue(s): Urdu | Punjabi
Other language(s): English
DIGITAL SKILLS
Key Skills
Microsoft Office / Scientific Calculation / Wordpress, SEO, Analytics / Technical Documentation
Soft Skills
Critical Thinking / Research / Problem Solving / Organization
Technical Tools
MATLAB / Arduino / Sketch Up / Trello
2 / 2
------------------------------
Soil Scientist
First Name: Rana Awais Murad
E-Mail Address: ranaawaismurad@gmail.com
Country: Pakistan
Phone: 03347593130
Job Position Applying For: Soil Scientist
Current Job Title: Elementary School Teacher
Total Years of Experience: 8
Copy your Resume / CV in this box: RANA AWAIS MURAD
Professional Summary
Dependable teacher with success providing educational assistance and
instruction to various levels of learners. Committed to providing students with
necessary tools, to achieve academic goals, instilling love of learning and
cooperative teamwork.
Work Experience
Elementary School Teacher
Punjab Education Department ,Pakistan , 04/2015- – Present
Languages & Other Interests
Urdu (Native), Punjabi (Native), English ( Advance ) I love to learn new things.
Contact
+923227417707
ranaawaismurad@gmail.com
Qazi Town Daska, Punjab,
Pakistan
Education
MS (Hons) in Agriculture ( Soil
Science)
Agriculture University Faisalabad ,
Faisalabad , Pakistan , –
BS ( Hons) in Agriculture ( Soil
Science)
PMAS ARID AGRICULTURE
UNIVERSITY RAWALPINDI ,
Rawalpindi , Pakistan , –
FSc (Pre-engineering) in Pre-
Engineering
Public College of Science ,
Gujranwala , Pakistan , –
Matriculation in Science
Govt. High School Daska , Daska,
Pakistan , –
------------------------------
E-Mail Address: ranaawaismurad@gmail.com
Country: Pakistan
Phone: 03347593130
Job Position Applying For: Soil Scientist
Current Job Title: Elementary School Teacher
Total Years of Experience: 8
Copy your Resume / CV in this box: RANA AWAIS MURAD
Professional Summary
Dependable teacher with success providing educational assistance and
instruction to various levels of learners. Committed to providing students with
necessary tools, to achieve academic goals, instilling love of learning and
cooperative teamwork.
Work Experience
Elementary School Teacher
Punjab Education Department ,Pakistan , 04/2015- – Present
Languages & Other Interests
Urdu (Native), Punjabi (Native), English ( Advance ) I love to learn new things.
Contact
+923227417707
ranaawaismurad@gmail.com
Qazi Town Daska, Punjab,
Pakistan
Education
MS (Hons) in Agriculture ( Soil
Science)
Agriculture University Faisalabad ,
Faisalabad , Pakistan , –
BS ( Hons) in Agriculture ( Soil
Science)
PMAS ARID AGRICULTURE
UNIVERSITY RAWALPINDI ,
Rawalpindi , Pakistan , –
FSc (Pre-engineering) in Pre-
Engineering
Public College of Science ,
Gujranwala , Pakistan , –
Matriculation in Science
Govt. High School Daska , Daska,
Pakistan , –
------------------------------
Electrical engineer
First Name: Aamir karim
E-Mail Address: aamir.karim2012@gmail.com
Country: India
Phone: +971565074583
Job Position Applying For: Electrical engineer
Current Job Title: Electrical engineer
Total Years of Experience: 8+years
Copy your Resume / CV in this box:
Aamir Karim
Electrical Engineer
Mailbox: aamir.karim2012@gmail.com
Mobile: +971-565074583
What's App:- +919835622705
RELEVANT EXPERIENCE
EDUCATION
Bachelor in ECE Engineering (MACET Magadh University), Bihar, India.
Computer Skills
Well versed with MS Office packages like Word, Excel, PowerPoint and Outlook SAP working Knowledge.
Training & Thesis
PLC Allen Bradley (SLC-500)-PLC Programming& Application.
PLC Automation using Micro PLC (Siemens LOGO).
Advanced Wireless Communication.
Portable Coded Wireless Message Communication.
Electrical Engineer with 10 years of work Experience (Approved UAE EWE Card Holder)
GCC UAE Experience: - Electrical Engineer 7+ years are running work Experience in UAE.
Working experience in the field of Electrical Engineering with a vision to value opportunities and capitalize by utilizing given resources, fine-tuned, analytical skills coupled with effective communication.
Hands on experience in Review and Approval of Electrical Drawings, Materials and Quality Control Documentation.
Expertise in Supervision, Project Execution, Pre- Commissioning, Testing & Commissioning for Residential, Commercial, High rise buildings.
Date From May 2016 – Current United Arab Emirates
Employer- Fujairah National Electrical & Mechanical LLC.
Job Title: Electrical Engineer
Project: Building Construction
Current Projects :-G+3P+19+Roof Building Residential & Commercial Project Client (Mr. Ali Suhail & Mr.Musabba Total MEP AED 23Million)
Completed Project: - G+4P+27 Residential & Commercial Building, G+9 Residential & Commercial Building, G+2 Total 12 Luxury Residential Villas Projects.
Job Description:-
Review and recommend Approval of the Design drawings, Shop drawings and documents / Method of Statements (M.O.S), Inspection Test Plans (ITP's), Equipment specifications / Data Sheets and Material submittals as per Standards, Codes and Specifications.
Review and interpret proposed designs, building specifications, bill of quantities for appropriateness to required function and initiates revisions where necessary, advise Contractor as how to achieve best required results.
Dealing with different disciplines of Vendor's/supplier for Quotation.
Undertake three or more Quotation for each system which is in the Design/Tender Drawing.
Undertake the Variation of work BOQ based on consultant/client request and approval.
Prepare Budget in Excel sheet for Electrical LV system and Low current system.
Undertake overview supervision duties on site to ensure general compliance of works with Approved Shop Drawings, Specification and Contract requirements.
Responsible for implementation and updating of Electrical progress log Sheet, MIR log sheet Checklist & IR logs for accurate traceability of pending, rejected, approved/inspected areas and complete project progress.
Carry out Site inspections for sub-Contractors work, which includes Mockup, Electrical Installations, Low Current Installations, Material Inspections and Testing & Commissioning.
Produce the written and photographic record of the Construction activities through Reports.
Reject/issues non-conformance report for work that does not comply with Contract and specification documents.
Review and recommend Load Calculations, Panel Schedules, Single Line Diagrams and Riser Plans for Low Voltage & Low Current Systems.
Review and recommend Main & Branch Panels Schematic and Low Current Equipment Switches, Terminations and Racks.
Review and recommend Cable sizing and selection as per Codes and Calculations.
Witness Factory Tests for Approval of LV/MV Equipment.
Attending Minutes of Meeting (MOM), Site Tours with all disciplines: Client, Contractor and Engineers involved in the project.
Prepare PR'S in SAP and Resources for Time sheet in SAP.
Prepare RIW, RFI and MIR with Consultant or Client for Approvals.
Prepare and Review Snag lists and follows up remedial works until works found satisfactory.
Prepare and Review Testing and commissioning documents/procedures.
Prepare As-built Drawings.
Date From March 2015 - April 2016
Employer- Pratibha Industries Limited, Delhi, India
Job Title: GET Instrument Engineer
Project: Metro Rail Project
Job Description:-
I was Electrical & Instrumentation GET Engineer position at DELHI METRO RAIL CORPORATION Site CC-23 design and construction of Tunnel between Hauz khas and Kalka Mandir station by shield Tunnel Boring Machine ,NATM (New Australia Tunneling Method & Underground ramp through cut &cover method cross passage by drilling and blasting.
I am responsible for the site progress day to day work has to be done as per Delhi Metro Rail Corporation Client requirements and standard.
Installation of Instrument like Inclinometer, Strain gauge, Tilt meter(manual),vibration monitoring, surface settlement point ,Borehole extensometer single /multi-point ,load cell ,Electro level Beam sensor etc. Execute the work at site with technicians as per shop drawing.
Data Recording, online of TPMS &ELB Sensor, Inclinometer, Incline cum extensometer, Standpipe Piezometer, Vibrating Pipe Peizometer,Strain gage,Struct load cell, Anchor bolt load cell, vibration unit, Tilt meter etc.
Co-ordinate with senior person whiles any trouble shooting at site.
Co-ordinate with utility and GEO investigation work at site.
------------------------------
E-Mail Address: aamir.karim2012@gmail.com
Country: India
Phone: +971565074583
Job Position Applying For: Electrical engineer
Current Job Title: Electrical engineer
Total Years of Experience: 8+years
Copy your Resume / CV in this box:
Aamir Karim
Electrical Engineer
Mailbox: aamir.karim2012@gmail.com
Mobile: +971-565074583
What's App:- +919835622705
RELEVANT EXPERIENCE
EDUCATION
Bachelor in ECE Engineering (MACET Magadh University), Bihar, India.
Computer Skills
Well versed with MS Office packages like Word, Excel, PowerPoint and Outlook SAP working Knowledge.
Training & Thesis
PLC Allen Bradley (SLC-500)-PLC Programming& Application.
PLC Automation using Micro PLC (Siemens LOGO).
Advanced Wireless Communication.
Portable Coded Wireless Message Communication.
Electrical Engineer with 10 years of work Experience (Approved UAE EWE Card Holder)
GCC UAE Experience: - Electrical Engineer 7+ years are running work Experience in UAE.
Working experience in the field of Electrical Engineering with a vision to value opportunities and capitalize by utilizing given resources, fine-tuned, analytical skills coupled with effective communication.
Hands on experience in Review and Approval of Electrical Drawings, Materials and Quality Control Documentation.
Expertise in Supervision, Project Execution, Pre- Commissioning, Testing & Commissioning for Residential, Commercial, High rise buildings.
Date From May 2016 – Current United Arab Emirates
Employer- Fujairah National Electrical & Mechanical LLC.
Job Title: Electrical Engineer
Project: Building Construction
Current Projects :-G+3P+19+Roof Building Residential & Commercial Project Client (Mr. Ali Suhail & Mr.Musabba Total MEP AED 23Million)
Completed Project: - G+4P+27 Residential & Commercial Building, G+9 Residential & Commercial Building, G+2 Total 12 Luxury Residential Villas Projects.
Job Description:-
Review and recommend Approval of the Design drawings, Shop drawings and documents / Method of Statements (M.O.S), Inspection Test Plans (ITP's), Equipment specifications / Data Sheets and Material submittals as per Standards, Codes and Specifications.
Review and interpret proposed designs, building specifications, bill of quantities for appropriateness to required function and initiates revisions where necessary, advise Contractor as how to achieve best required results.
Dealing with different disciplines of Vendor's/supplier for Quotation.
Undertake three or more Quotation for each system which is in the Design/Tender Drawing.
Undertake the Variation of work BOQ based on consultant/client request and approval.
Prepare Budget in Excel sheet for Electrical LV system and Low current system.
Undertake overview supervision duties on site to ensure general compliance of works with Approved Shop Drawings, Specification and Contract requirements.
Responsible for implementation and updating of Electrical progress log Sheet, MIR log sheet Checklist & IR logs for accurate traceability of pending, rejected, approved/inspected areas and complete project progress.
Carry out Site inspections for sub-Contractors work, which includes Mockup, Electrical Installations, Low Current Installations, Material Inspections and Testing & Commissioning.
Produce the written and photographic record of the Construction activities through Reports.
Reject/issues non-conformance report for work that does not comply with Contract and specification documents.
Review and recommend Load Calculations, Panel Schedules, Single Line Diagrams and Riser Plans for Low Voltage & Low Current Systems.
Review and recommend Main & Branch Panels Schematic and Low Current Equipment Switches, Terminations and Racks.
Review and recommend Cable sizing and selection as per Codes and Calculations.
Witness Factory Tests for Approval of LV/MV Equipment.
Attending Minutes of Meeting (MOM), Site Tours with all disciplines: Client, Contractor and Engineers involved in the project.
Prepare PR'S in SAP and Resources for Time sheet in SAP.
Prepare RIW, RFI and MIR with Consultant or Client for Approvals.
Prepare and Review Snag lists and follows up remedial works until works found satisfactory.
Prepare and Review Testing and commissioning documents/procedures.
Prepare As-built Drawings.
Date From March 2015 - April 2016
Employer- Pratibha Industries Limited, Delhi, India
Job Title: GET Instrument Engineer
Project: Metro Rail Project
Job Description:-
I was Electrical & Instrumentation GET Engineer position at DELHI METRO RAIL CORPORATION Site CC-23 design and construction of Tunnel between Hauz khas and Kalka Mandir station by shield Tunnel Boring Machine ,NATM (New Australia Tunneling Method & Underground ramp through cut &cover method cross passage by drilling and blasting.
I am responsible for the site progress day to day work has to be done as per Delhi Metro Rail Corporation Client requirements and standard.
Installation of Instrument like Inclinometer, Strain gauge, Tilt meter(manual),vibration monitoring, surface settlement point ,Borehole extensometer single /multi-point ,load cell ,Electro level Beam sensor etc. Execute the work at site with technicians as per shop drawing.
Data Recording, online of TPMS &ELB Sensor, Inclinometer, Incline cum extensometer, Standpipe Piezometer, Vibrating Pipe Peizometer,Strain gage,Struct load cell, Anchor bolt load cell, vibration unit, Tilt meter etc.
Co-ordinate with senior person whiles any trouble shooting at site.
Co-ordinate with utility and GEO investigation work at site.
------------------------------
Sales and Operations Engineer
First Name: Arun V
E-Mail Address: arunvenugopal1392@gmail.com
Country: United Arab Emirates
Phone: 971 557791881
Job Position Applying For: Sales/operations
Current Job Title: Sales and Operations Engineer
Total Years of Experience: 6
Copy your Resume / CV in this box: Contact Phone
+971-557791881
Email
arun1392@gmail.com
Education
2021
Master's Degree in Business Administration [Operations Management and Supervision]
Jaipur National University
2016
Bachelor's Degree in Engineering [E.C.E]
William Carey University, Shillong
CORE COMPETENCIES
Procurement and Vendor Management Strategic Thinking
Operations Management
Process Improvement
Problem Solving
Project Management Collaboration and Teamwork Stakeholder Management Logistics and supply chain Quality and Delivery
ARUN V
Senior Operations Executive| Dubai
Results-driven operations manager with 7 years of proven track record of optimizing business processes and driving operational excellence, Logistics, Sales and procurement. Seeking a challenging role in a dynamic organization where I can leverage my leadership skills, strategic mindset, and operational expertise to enhance efficiency, streamline operations, and achieve business objectives. Committed to fostering a collaborative work environment, developing high-performing teams, and delivering exceptional results.
Summary
Extensive experience in operations, logistics, sales, and procurement, with a focus on improving processes, reducing costs, and increasing profitability.
Strong analytical and problem-solving skills, with the ability to identify opportunities for improvement and implement effective solutions.
Proven ability to build and maintain strong relationships with stakeholders, suppliers, customers, and cross-functional teams.
Excellent communication and negotiation skills, with a customer-centric approach to business.
Strong leadership skills, with the ability to motivate and guide teams to achieve operational excellence.
Solid understanding of regulatory compliance, quality control standards, and safety protocols.
Industry: Healthcare, FMCG, Recruitment
Professional Experience
Mar 2022 - Present
HESSA MEDICAL EQUIPMENTS CO LLC, UAE
Sales and Operations Engineer
Managing day-to-day operations, ensuring efficient utilization of resources, and meeting customer demands.
Developed and implemented operational strategies to enhance productivity, reduce costs, and improve overall performance.
Collaborated with cross-functional teams to align operations with business objectives and ensure seamless execution of projects.
Conducted performance evaluations, provided feedback, and facilitated professional development opportunities for team members.
Identify and target potential customers, including hospitals, clinics, and medical practices, to generate leads and expand the customer base.
Conduct market research to understand customer needs, competitor offerings, and industry trends.
Deliver product presentations, demonstrations, and technical proposals to showcase the benefits and features of medical equipment.
Negotiate contracts, pricing, and terms with customers to secure sales and maximize profitability.
Nov 2020 to March 2022
MEDTRA GENERAL TRADING LLC, UAE
Senior Operations Executive
Supervised daily operations, including inventory management, order fulfillment, and logistics coordination.
Monitored key performance indicators (KPIs), identified performance gaps, and implemented corrective actions to improve efficiency.
Assisted in developing and implementing standard operating procedures (SOPs) to streamline processes and ensure consistency.
Coordinated with vendors and suppliers to ensure timely delivery of goods and services.
Prepared and analyzed operational reports, providing insights and recommendations to senior management.
Streamlined processes and workflows, resulting in an increase in operational efficiency.
Personal Details Name
Arun V
Nationality
Indian
Passport No
T3434102
Driving License
Holding valid UAE licence
Oct 2019 to Nov 2020 Operations Coordinator
Coordinated and supervised all aspects of warehouse operations, including receiving, storage, order picking, and shipping, ensuring efficient and accurate processes.
Managed inventory levels, conducted regular cycle counts, and implemented inventory control measures to minimize discrepancies and improve accuracy. Oversaw order fulfillment processes, ensuring timely and accurate picking, packing, and shipment of customer orders.
Collaborated with logistics teams to coordinate inbound and outbound shipments, optimize delivery schedules, and resolve any issues or delays. Implemented process improvements to enhance warehouse efficiency, including optimizing layout, streamlining picking methods, and implementing barcode scanning systems.
Jun 2018 - Jul 2019
MAZENET
Business Development Executive Oct 2017 - May 2018
NEXUS - Global IT Solutions
Business Development Executive Mar 2016 - Sep 2017
KGISL
Process Associate
Professional Certifications
Logistics and Supply Chains - Fundamentals,Design,Operations - Udemy Procurement Management - Udemy
------------------------------
E-Mail Address: arunvenugopal1392@gmail.com
Country: United Arab Emirates
Phone: 971 557791881
Job Position Applying For: Sales/operations
Current Job Title: Sales and Operations Engineer
Total Years of Experience: 6
Copy your Resume / CV in this box: Contact Phone
+971-557791881
arun1392@gmail.com
Education
2021
Master's Degree in Business Administration [Operations Management and Supervision]
Jaipur National University
2016
Bachelor's Degree in Engineering [E.C.E]
William Carey University, Shillong
CORE COMPETENCIES
Procurement and Vendor Management Strategic Thinking
Operations Management
Process Improvement
Problem Solving
Project Management Collaboration and Teamwork Stakeholder Management Logistics and supply chain Quality and Delivery
ARUN V
Senior Operations Executive| Dubai
Results-driven operations manager with 7 years of proven track record of optimizing business processes and driving operational excellence, Logistics, Sales and procurement. Seeking a challenging role in a dynamic organization where I can leverage my leadership skills, strategic mindset, and operational expertise to enhance efficiency, streamline operations, and achieve business objectives. Committed to fostering a collaborative work environment, developing high-performing teams, and delivering exceptional results.
Summary
Extensive experience in operations, logistics, sales, and procurement, with a focus on improving processes, reducing costs, and increasing profitability.
Strong analytical and problem-solving skills, with the ability to identify opportunities for improvement and implement effective solutions.
Proven ability to build and maintain strong relationships with stakeholders, suppliers, customers, and cross-functional teams.
Excellent communication and negotiation skills, with a customer-centric approach to business.
Strong leadership skills, with the ability to motivate and guide teams to achieve operational excellence.
Solid understanding of regulatory compliance, quality control standards, and safety protocols.
Industry: Healthcare, FMCG, Recruitment
Professional Experience
Mar 2022 - Present
HESSA MEDICAL EQUIPMENTS CO LLC, UAE
Sales and Operations Engineer
Managing day-to-day operations, ensuring efficient utilization of resources, and meeting customer demands.
Developed and implemented operational strategies to enhance productivity, reduce costs, and improve overall performance.
Collaborated with cross-functional teams to align operations with business objectives and ensure seamless execution of projects.
Conducted performance evaluations, provided feedback, and facilitated professional development opportunities for team members.
Identify and target potential customers, including hospitals, clinics, and medical practices, to generate leads and expand the customer base.
Conduct market research to understand customer needs, competitor offerings, and industry trends.
Deliver product presentations, demonstrations, and technical proposals to showcase the benefits and features of medical equipment.
Negotiate contracts, pricing, and terms with customers to secure sales and maximize profitability.
Nov 2020 to March 2022
MEDTRA GENERAL TRADING LLC, UAE
Senior Operations Executive
Supervised daily operations, including inventory management, order fulfillment, and logistics coordination.
Monitored key performance indicators (KPIs), identified performance gaps, and implemented corrective actions to improve efficiency.
Assisted in developing and implementing standard operating procedures (SOPs) to streamline processes and ensure consistency.
Coordinated with vendors and suppliers to ensure timely delivery of goods and services.
Prepared and analyzed operational reports, providing insights and recommendations to senior management.
Streamlined processes and workflows, resulting in an increase in operational efficiency.
Personal Details Name
Arun V
Nationality
Indian
Passport No
T3434102
Driving License
Holding valid UAE licence
Oct 2019 to Nov 2020 Operations Coordinator
Coordinated and supervised all aspects of warehouse operations, including receiving, storage, order picking, and shipping, ensuring efficient and accurate processes.
Managed inventory levels, conducted regular cycle counts, and implemented inventory control measures to minimize discrepancies and improve accuracy. Oversaw order fulfillment processes, ensuring timely and accurate picking, packing, and shipment of customer orders.
Collaborated with logistics teams to coordinate inbound and outbound shipments, optimize delivery schedules, and resolve any issues or delays. Implemented process improvements to enhance warehouse efficiency, including optimizing layout, streamlining picking methods, and implementing barcode scanning systems.
Jun 2018 - Jul 2019
MAZENET
Business Development Executive Oct 2017 - May 2018
NEXUS - Global IT Solutions
Business Development Executive Mar 2016 - Sep 2017
KGISL
Process Associate
Professional Certifications
Logistics and Supply Chains - Fundamentals,Design,Operations - Udemy Procurement Management - Udemy
------------------------------
AutoCAD Draftsman
First Name: Abdul Gafoor Jassim
E-Mail Address: gafoorjassim59@gmail.com
Country: India
Phone: +971554656912
Job Position Applying For: AutoCAD Draftsman
Current Job Title: Site Engineer
Total Years of Experience: 2 years of experience
Copy your Resume / CV in this box: Respected HR Team, Greetings!
I'm an Engineer holding a Bachelor's degree in Civil. Currently searching for jobs in the UAE to start my career in a promising path.
I'm looking for an opportunity to perform in your reputed organization. I have worked as a Site Engineer & CAD Draftsman worked in Voora Group Pvt, Ltd. which is a construction company for residential buildings.
Available: Immediately
Visa Status: Visit Visa
I have attached my resume for your reference. Thanks for taking the time to review my profile. I look forward to hearing from you.
Best Regards,
Abdul Gafoor Jassim
+971554656912
gafoorjassim59@gmail.com
------------------------------
Electrical Engineer, Supervisor
First Name: MD HARUN OR RASHID
E-Mail Address: dewan.harun@outlook.com
Country: Bangladesh
Phone: +8801712908726
Job Position Applying For: Electrical Engineer/ Supervisor
Current Job Title: Electrical Inspector
Total Years of Experience: 20
Copy your Resume / CV in this box:
CAREER OBJECTIVE
To obtain a position of an organization that uses my engineering skills, knowledge and capabilities to the maximum extent and develop a challenging career where I can do something innovative along with the organization's objective.
CAREER SUMMRAY
Having expertise in Technical Management, Electrical Design According to SLD, ELD, Sub-Station Design, H.T Switch Gear, L.T Switch Gear, PFI, LPS, ATS, BNBC, NFPA-780, NEC, IEC, etc.., All about System Earthling, Electrical Drawing, and Fire Protection & Detection System. Programmable Logic Controller (PLC), Variable Frequency Drive (VFD), Fire Fighting & Safety Regulations, Health & Safety for Work Place. Computer knowledge in MS Office, MS Excel, MS Visio, Power Point, Computer Hard Ware & Software Solution. All type of air conditioning system. Confident to implement cost-effective system maintenance to control capital, operating expenditures with optimum machine performance. Prepared maintenance report and schedule with regulatory standards for ensuring the highest quality.
KEY SKILLS
• Power SCADA
• ABB RTU
• IEC 870-5-101/104
• IEC 61850
• MODBUS
• Industrial Ethernet System
• Profibus & ProfNet Communication System.
• CCTV Monitoring System
• Substation Installation
• Substation Automation
• Industrial Automation Maintenance & Trouble Shooting.
• Conveyor Belt & Table Conveyor
• Proximity Sensor, Photo Sensor, Reflex Light Barrier Sensor, Motion Sensor
• Automatic Transfer System
• Siemens Smart PLC & Drive System
• Gear Motor, Stopper Motor
• Diesel Generator
TOOLS
• Siemens TIA Portal
• Omron
• Micro SCADA Pro SYS600
• RTUtil500
• PCM600
• IET600
• Edrow Max
• MS Visio
PERSONAL STRENGTHS
• Confident and positive, willing to accept responsibility.
• Willing to work for the best for an organization.
• Open minded in adapting new and challenging situation.
• Able to work in a team and can maintain effective relationship.
LANGUAGE PROFICIENCY
• Bengali (Mother Tongue)
• English (Professional Proficiency) both in speaking and writing
• Hindi (Professional Proficiency)
PERSONAL DETAILS
Date of Birth : April 05, 1979
Blood Group : O+ (Positive)
Nationality : Bangladeshi
Marital Status : Marred
Permanent Address:
Name : Md. Harun Or Rashid
C/O : Md. Afsaruddin Dewan
Village : Jhitka Uzanpara (Dewan Monjil)
Post : Maluchi Bazar
P.S : Horirampur
District : Manikgonj
Country : Bangladesh
REFERENCES
Mr. Vivek Kumar Bhandari
Departmental Head (Power Supply
System) MRT Line-6, Dhaka, Bangladesh
NKDM ASSOCIATION
vivekkumarbhandari@gmail.com
Mobile +919871575335, +8801798033712
Mr. Ashish Sandilya
NKDM ASSOCIATION
Departmental Head (Overhead Catenary
Power Supply System) MRT Line-6, Dhaka,
Bangladesh.
Mobile +919910116733, +8801301377563
ashish5659@gmail.com
https://www.linkedin.com/in/ashish-shandilya-652813101
Mr. Senthil T, (Manager (T&C)
Larsen & Toubro (India)
Mobile +919843686982,
SENTHILT@lntecc.com
https://www.linkedin.com/in/senthil-t-ceng-india-mie-46145940/
MD. HARUN-OR-RASHID
Dhaka Metro Rail Project. MRT Line-6, CP-07 (NKDM), Uttara, Diabari, Dhaka-1230.
+88 01712908726 (WhatsApp), +8801611729333
dewan.harun@outlook.com, harun316@gmail.com
WORK EXPERIENCE
Clint : Dhaka Mass Rapid Transit Company Ltd (DMTCL)
Dhaka Metro Rail Project MRT Line-6
Contactor : Larsen & Toubro (L&T)
Consultant: NKDM Association (Nippon Koei-NK India-DMRC-MOTT UK-MOTT India-DDC)
Position : Electrical Inspector (Consultant Part)
November, 2020 – Present
Company Location : Begum Rokeya Sarani, Agargaon, Dhaka.
Work Location : Dhaka Metro Rail Depo, MRT Line-6, Uttara, Dhaka
Key Responsibilities:
Sub Station Commissioning & Testing (33 /. 415 KV).
40/50 MVA, 132/33 KV Sub Station (GIS) Testing & Commissioning with SCADA (Micro SCADA SYS600).
630KVA, 1000KVA, 4400KVA 33/.415 KV Sub Station Maintenance & Troubleshooting.
Hitachi & Fuji Online UPS Testing & Commissioning.
Commissioning & Testing SCADA (Micro SCADA SYS600) with RTU.
SCADA System Designing and Development for Substation Automation according to SLD and System Architecture drawing. Establish IEC 61850 & IEC 60870-5-104 Communication Networks and Substation systems in S/S.
Electro Mechanical works.
Maintain Work report on site.
Maintain Environment, Health & Safety (EHS) Department (Ensuring safety on site, inspect site for safety, Inspect different types of vehicles. Such as Crane, Forklift, Trailer, Excavator etc.
Conducting PEP-TALK Meeting before starting work.
132 & 33 KV Underground cable laying & jointing work supervision.
Bengal Fine Ceramics Limited (BFCL)
Location: Savar, Dhaka
Position: Deputy Manager (Electrical) Maintenance
July, 2018 – October, 2019
Key Responsibilities:
Sub Station installation (33 /. 415 KV).
6 MVA, 33/11 KV Sub Station (AIS) Operation & Maintenance.
Factory Automation Maintenance & Trouble Shooting
IPS & UPS Operation & maintenance
Electro Mechanical works.
Maintain Work report on site.
Hydraulic & Pneumatic System Maintenance & Trouble Shooting.
Belt Conveyor Automation System Maintenance.
Shuttle Kiln Operation & Maintenance.
Screw Air Compressor Maintenance & Trouble Shooting.
Automatic cup making plant & Edge finishing machine programming with omron PLC.
Protik Ceramics Limited (PCL)
Location : Kalampur, Dhamrai, Dhaka
Position : Deputy Manager (Electrical) Maintenance
November 2016 – June, 2018
Key Responsibilities:
Sub-Station installation (11 /. 415 KV).
11KV/.415KV Switchgear installation.
Cable laying implement.
IPS & UPS installation.
Cable tray, IMC Conduit works, Welding.
Installation of FDA System.
Maintain Environment, Health & Safety (EHS) Department (Ensuring safety on site, inspect site for safety, Inspect different types of vehicles. Such as Crane, Forklift, Trailer, Excavator etc.
Conducting PEP-TALK Meeting before starting work.
Electro mechanical works.
BOQ management.
Monno Ceramics Limited (MCIL)
Location: Islamprur, Dhamrai, Dhaka.
Position: Deputy Manager (Electrical Maintenance)
November, 2009 – October, 2016
Key Responsibilities:
Sub-Station installation (33 /. 415 KV) Operation.
33KV/.415KV Switchgear installation, Maintenance & Trouble Shooting.
Installation, Maintenance & Trouble Shooting all Kind of Automatic Table ware manufacture machine (Like ACM, Sama Pressure Casting, Dost (High Pressure) GmbH, SAMA, Ried hamer GmbH Automatic Kiln i.e.g)
Cable laying implement.
IPS & UPS installation.
Cable tray, IMC Conduit works, Welding.
Installation of Intercom & PA System.
Maintain Environment, Health & Safety (EHS).
Conducting PEP-TALK Meeting before starting work.
Electro mechanical works.
BOQ management.
Maintenance & Trouble Shooting all type of production related machineries.
Computer hardware & software related issue trouble shooting.
Digital Security & CCTV System.
All type of hydraulic system maintenance & trouble shooting.
Voltas Limited (A TATA ENTERPRISE)
Location: Abu Dhabi, UAE
Position: Supervisor (Electrical)
May, 2006 – November, 2009
Key Responsibilities:
Solving running Electrical & Electronics problem.
Preventive Maintenance & Breakdown Maintenance.
Maintenance Schedule planning & Execution.
SR Management.
Execute all types of maintenance.
Supervision & Monitoring MEP Work.
BMS System Maintenance & Trouble Shooting.
Exhust fan installation with VVVF Drive.
China Bangla Ceramics Limited.
Location: Tarabo, Rupgonj, Narayangonj.
Position: Supervisor/ Monitor (Electrical)
July, 2003 –April, 2006
Key Responsibilities:
Solving running Electrical & Electronics problem.
Preventive Maintenance & Breakdown Maintenance.
Maintenance Schedule planning & Execution.
Maintenance & Trouble Shooting Automatic Glost & Biscuit Kiln.
Maintenance & Trouble Shooting Hydraulic Press (SACMI) PH2600.
Execute all types of maintenance.
Maintenance & Trouble Shooting all type of Gas Burner & Spray Dryer.
Monno Ceramics Limited (MCIL)
Location: Islamprur, Dhamrai, Dhaka.
Position: Assistant Supervisor (Electrical Maintenance)
July, 1998 –June, 2003
Key Responsibilities:
Sub-Station installation (33 /. 415 KV) Operation.
33KV/.415KV Switchgear installation, Maintenance & Trouble Shooting.
Installation, Maintenance & Trouble Shooting all Kind of Automatic Table ware manufacture machine (Like ACM, Sama Pressure Casting, Dost (High Pressure) GmbH, SAMA, Ried hamer GmbH Automatic Kiln i.e.g)
Cable laying implement.
Automatic Forming M/C Schedule Maintenance & Trouble Shooting.
ACADEMIC QUALIFICATIONS
1998 Diploma in Electrical Engineering
Rajshahi Polytechnic Institute
Group: Electrical Technology
GPA / Division: First
1995 Secondary School Certificate (SSC)
Maluchi Pilot High School
Group: Science
GPA / Division: First
Professional Skill Testing & Training Information
2022 Professional Skill Testing & Training
Mirpur Agricultural Workshop & Training School (MAWTS)
Topic: Electrical Equipment Installation, Testing & Commissioning, Maintenance & Trouble Shooting
Result: PASS
2014 Occupational Health & Safety (OHS)
Department of Occupational Health & Safety (OHS)
Topic: Orientation Training on Occupational Health & Safety (OHS)
Result: PASS
2014 Fire Fighting Rescue & First Aid
Bangladesh Fire Service & Civil Defence Directorate
Topic: Fire Fighting, Fire Preventions, Rescue & First Aid Training
Result: PASS
Professional Electrical Licensing Information
2015 Work & Safety for Low, Medium and H.T Voltage equipment
People Republic of Bangladesh Electrical License Board Dhaka.
Topic: Industrial work safety low, medium & high voltage line Equipment, Safety Sub-station H.T & L.T Switch Gear Operation, Maintenance & Trouble Shooting & Factory Automation System.
Result: PASS
SKILLS
Microsoft Office : MS Word, MS Excel, MS Power Point
Typing : Well speed on typing in English
Electrical Drawing : EdroMax, MS Visio
PLC : Siemens, (S7-95U,100U, S7-200, 300, 400, 1200, 1500), Omron, Mitsubishi, Delta, LS, Fatek,
VFD : Siemens, SEW, Lenze, Delta, Mitsubishi, Hitachi, Omron, Shihlin, LS, Telemecanique (Schneider Electric).
Any type of Natural Gas Bruner.
All type of electrical & electronics home appliance.
Water pump.
River osmosis water plant maintenance & trouble shooting.
Digital security system.
Computer hardware & software system.
Computer network system.
Installation, Maintenance & Trouble Shooting all type Air Conditioning System.
DECLARATION
I hereby certify that the above information is true and correct to the best of my knowledge and belief.
Water Treatment Plant Operator
First Name: Muhammad Tufail
E-Mail Address: qarotech@gmail.com
Country: Canada
Phone: +96896748396
Job Position Applying For: Water treatment plant operator
Current Job Title: Water treatment plant operator
Total Years of Experience: 17 years
Copy your Resume / CV in this box: Muhammad Tufail
+96896748396
qarotech@gmail.com
WATER TREATMENT TECH.
(SWRO, BWRO, STP)
*Work Experience :
Royal Oman Police Muscat Oman as a water treatment plant technician. 2012 to till.
*House of trading & services L. L. L. C. Muscat Oman as a water Treatment plant Technician. 2010 to 2012
*AL Morrell Development & Oasis international bottle drinking water plant Iraq as QA / RO Technician. 2004 to 2009.
*Education :
*Diploma in Plumbing GCT Rasul 1994
*Metriculation gujranwala board 1989.
>Skill & Knowledge:
*17 years of experience in the water field.
*Installation, Operating systems and Maintenance of water Treatment system.
*Check the quality of water, TDS, Conductivity, pH, THM, HPC, etc.
*Calibration and maintain all water testing equipments.
*Backwash of MMF. CIP with low & high pH chemicals.
*Chemicals process, MSDS including testing, monitoring and adjustment of chemicals dosing system etc.
*Monitoring and controlling the process parameters, quality of water and analyzing process for stabilization thereby ensuring smooth operation.
* Monitoring routine maintenance and troubleshooting for equipment, s on regular basis for higher productivity and efficiency.
*Basic computer & data entry etc.
> Personal details :
*D. O. B. : 09 April 1972
* Martial status : married /male
*National Pakistani
* Passport details:
BS 3496493
Exp: 26 August 2029
Operation Engineer, Project Engineer
First Name: Azaz Farukbhai Mansur
E-Mail Address: amansur17@gmail.com
Country: India
Phone: 8866712027
Job Position Applying For: Operation Engineer/Project engineer
Current Job Title: Works Superintendent
Total Years of Experience: 10.4 years
Copy your Resume / CV in this box: CURRICULUM VITAE
APPLICATION FOR : REF NO :
CARRIER OBJECTIVE:
AZAZ FARUKBHAI MANSUR
LOCAL ADDRESS:
B/13 Anant Park Society , near Sabri high school sayad vasana road Dist:vadodra , State: Gujarat, Pin cod : 390007
E-Mail:
amansur17@gmail.com
Phone no:
+91-8866712027 +91-7567942859
Permanent Address :
Main road, At & po : palasana, Dist:
Surat ,State: Gujarat , Pin cod : 394315
Personal Data:
Date of Birth:feb 10th, 1987
OBJECTIVE :
To establish a rewarding career in process development and engineering field and serve myself for well being of mankind and also to work in a healthy, innovative and challenging environment extracting the best out of me, which is conducive to learn and grow at professional as well as personal level thereby directing my future endeavors as an asset to the organization
EDUCATIONAL QUALIFICATION:
Academic Qualification Institute/ Year of Class University Passing
B tech chemical
Bharati vidhyapeeth deemed University pune
2012
First class with distention
Gender Nationality Faith
: Male : Indian
: Islam
Diploma chemical
Technical examination board , Gujarat state, Gandhinagar
2007
First class
12 HSC
Gujarat higher secondary education board, Gandhinagar
2004
Pass
10 SSC
Gujarat secondary education board, Gandhinagar
2002
First class
Professional Experience:
● Currently working in Pi industries Limited ,Jambusar as Executive (18th Sep 2018 to Present ) A well known Agrichem company having latest technology & Safety system.
● United phosphorus limited (UPL ) as Production Executive (14th April 2014 to 8th sep 2018 ) A well-known agrochemical company in the world ,
● Aarti industries Ltd, Vapi (Gujarat) as a Chemical Engineer (20th June 2012 to 12th April 2014) A well-known largest benzene bulk chemical manufacturing firm,
AZAZ FARUKBHAI MANSUR
Reliance industries Ltd, Hazira Surat working as (Apprentice)
Marital Status : Single Native Place :Surat,Gujarat
Languages known : English, Gujarati & Hindi.
Soft Skills
❖ Effective Teamwork
❖ Good&Quick learner
❖ Committed towards work
❖ Effective Listening Skills
❖ Polite and humble
❖ Can work in adverse conditions
❖ Can work for long hours
❖ Ability to lead the team
HOBBIES:
Going for long rides on weekends and listening music
●
field executive after diploma chemical engineering in duration of 4 th Feb 2008 to 3 th Feb 2009 in .
● Job Description:
○ Proper deployment of all resources to achieve the production
target of the respective shifts.
○ Ensure that all plant operational activities, start up and shut
down are carried out safely as per SOP'S. .
○ Monitoring of plant operational parameters On DCS and field
take-up quick corrective measures in case of any deviations. ○ Ensures preparation of equipment for hand-over to maintenance as per the maintenance plan with proper safety permit. Supervision of maintenance activities carried out
during the shift.
○ Take charge of plant emergency situations and give
instructions/guidelines supervisor to overcome the plant
emergency situations
○ Pressure testing and hydro testing of vessels, distillation
column etc.
○ To prepare daily production & consumption report. .
○ Attain daily operating meetings (DOM) with Mangers
○ Preparation of Raw materials planning and monthly
consumption reports during month closing.
○ Process started up compliance during new procedures and
Safety training:
products.
● ERT (emergency rescue team) member working as team member . ● Participate in various safety related programs, Mock Drill and safety
awareness programs. Firefighting programs etc .
● Bromin , Chlorine, Thyonial chloride (TC), Isobutelen (IB), CS2, H2S
handle chemical safety related programs and awareness handling
activity.
● Daily conduct safety talks with operators and colleges. ● Participate safety related programs
● Lead as plant PSSR.
Key skill :
● Experience in Packed Distillation coloum, recovery column, scrubber System, Drying, Evaporation, Acidification Hydrolysis, nitration ,crystallization, Extraction , Centrifuge filtration , cooling towers, ,
● Experience in YOKOGAWA R6 latest DCS sytem.
● Experience Different type of reactors and filtration equipment , ● Experience in handling Hazardous chemical and solvents.
● Familiar with various types of pumps, valves, compressors,
Exchanger,
● Ability to handle variety of tasks and shift priorities simultaneously.
AZAZ FARUKBHAI MANSUR
● Ability to work in a team environment and also handle project work
with documentation.
● Having knowledge usage of SCBA, gas meters, LEL meters, oxygen
meters, and other safety apparatus.
● Expertise in, SAP PP , Microsoft word, Microsoft excel, power point.
Good communication skill.
● Observed max near miss and participated in Root cause analysis
during investigation.
● Excellent Leadership quality.
● Knowledge of work safe online software
● Participant preparation of JSA for non routine activities
● Participate HAZOP from production side. .
● Plant comsssioning time participants HAZOP SOP varification,
HAZOP QA varification, PRE STARTUP SAFETY REVIEW.
● QMS awerneeas program during Plant startup.
● Initially varified log sheet & SOP update in YOKOGAWA DCS
sequence updating.
● Provides BOM detail to Given store and planning RM availability.
● Cordination QA Related documents (deviation control /change
control form) required from the production smoothly.
● Participate interlock graphics update DCS graphics and logsheet
upadte.
● Generating change from and MWO in plant
● Experience Tank farm with latest safety system .
PROJECT EXPERIENCE :
● New product BZCN in existing plant for modification in existing plant decontamination and commissioning and implications for change projects activity with documentation.
● Worked on commissioning & pre commissioning activity in Metribuzan plant manufacturing unit .
● Worked on commissioning fertilizer grade product
● ( Ammonium sulfate)
● Worked on commissioning activity in Triazinone plant which
is India's first manufacturing unit.
● Worked on nitration commissioning activity at Aarti industries
vapi.
PASSPORT NO. DATE OF ISSUE DATE OF EXPIRY PLACE OF ISSUE
: L-2420640 : 29-05-2013. : 28-05-2023. : GUJARAT
Passport (status)
AZAZ FARUKBHAI MANSUR
DECLARATION
I hereby declare that the above written particulars are true and correct to the best of my knowledge and belief.
AZAZ FARUKBHAI MANSUR
With Regards & Than
------------------------------
E-Mail Address: amansur17@gmail.com
Country: India
Phone: 8866712027
Job Position Applying For: Operation Engineer/Project engineer
Current Job Title: Works Superintendent
Total Years of Experience: 10.4 years
Copy your Resume / CV in this box: CURRICULUM VITAE
APPLICATION FOR : REF NO :
CARRIER OBJECTIVE:
AZAZ FARUKBHAI MANSUR
LOCAL ADDRESS:
B/13 Anant Park Society , near Sabri high school sayad vasana road Dist:vadodra , State: Gujarat, Pin cod : 390007
E-Mail:
amansur17@gmail.com
Phone no:
+91-8866712027 +91-7567942859
Permanent Address :
Main road, At & po : palasana, Dist:
Surat ,State: Gujarat , Pin cod : 394315
Personal Data:
Date of Birth:feb 10th, 1987
OBJECTIVE :
To establish a rewarding career in process development and engineering field and serve myself for well being of mankind and also to work in a healthy, innovative and challenging environment extracting the best out of me, which is conducive to learn and grow at professional as well as personal level thereby directing my future endeavors as an asset to the organization
EDUCATIONAL QUALIFICATION:
Academic Qualification Institute/ Year of Class University Passing
B tech chemical
Bharati vidhyapeeth deemed University pune
2012
First class with distention
Gender Nationality Faith
: Male : Indian
: Islam
Diploma chemical
Technical examination board , Gujarat state, Gandhinagar
2007
First class
12 HSC
Gujarat higher secondary education board, Gandhinagar
2004
Pass
10 SSC
Gujarat secondary education board, Gandhinagar
2002
First class
Professional Experience:
● Currently working in Pi industries Limited ,Jambusar as Executive (18th Sep 2018 to Present ) A well known Agrichem company having latest technology & Safety system.
● United phosphorus limited (UPL ) as Production Executive (14th April 2014 to 8th sep 2018 ) A well-known agrochemical company in the world ,
● Aarti industries Ltd, Vapi (Gujarat) as a Chemical Engineer (20th June 2012 to 12th April 2014) A well-known largest benzene bulk chemical manufacturing firm,
AZAZ FARUKBHAI MANSUR
Reliance industries Ltd, Hazira Surat working as (Apprentice)
Marital Status : Single Native Place :Surat,Gujarat
Languages known : English, Gujarati & Hindi.
Soft Skills
❖ Effective Teamwork
❖ Good&Quick learner
❖ Committed towards work
❖ Effective Listening Skills
❖ Polite and humble
❖ Can work in adverse conditions
❖ Can work for long hours
❖ Ability to lead the team
HOBBIES:
Going for long rides on weekends and listening music
●
field executive after diploma chemical engineering in duration of 4 th Feb 2008 to 3 th Feb 2009 in .
● Job Description:
○ Proper deployment of all resources to achieve the production
target of the respective shifts.
○ Ensure that all plant operational activities, start up and shut
down are carried out safely as per SOP'S. .
○ Monitoring of plant operational parameters On DCS and field
take-up quick corrective measures in case of any deviations. ○ Ensures preparation of equipment for hand-over to maintenance as per the maintenance plan with proper safety permit. Supervision of maintenance activities carried out
during the shift.
○ Take charge of plant emergency situations and give
instructions/guidelines supervisor to overcome the plant
emergency situations
○ Pressure testing and hydro testing of vessels, distillation
column etc.
○ To prepare daily production & consumption report. .
○ Attain daily operating meetings (DOM) with Mangers
○ Preparation of Raw materials planning and monthly
consumption reports during month closing.
○ Process started up compliance during new procedures and
Safety training:
products.
● ERT (emergency rescue team) member working as team member . ● Participate in various safety related programs, Mock Drill and safety
awareness programs. Firefighting programs etc .
● Bromin , Chlorine, Thyonial chloride (TC), Isobutelen (IB), CS2, H2S
handle chemical safety related programs and awareness handling
activity.
● Daily conduct safety talks with operators and colleges. ● Participate safety related programs
● Lead as plant PSSR.
Key skill :
● Experience in Packed Distillation coloum, recovery column, scrubber System, Drying, Evaporation, Acidification Hydrolysis, nitration ,crystallization, Extraction , Centrifuge filtration , cooling towers, ,
● Experience in YOKOGAWA R6 latest DCS sytem.
● Experience Different type of reactors and filtration equipment , ● Experience in handling Hazardous chemical and solvents.
● Familiar with various types of pumps, valves, compressors,
Exchanger,
● Ability to handle variety of tasks and shift priorities simultaneously.
AZAZ FARUKBHAI MANSUR
● Ability to work in a team environment and also handle project work
with documentation.
● Having knowledge usage of SCBA, gas meters, LEL meters, oxygen
meters, and other safety apparatus.
● Expertise in, SAP PP , Microsoft word, Microsoft excel, power point.
Good communication skill.
● Observed max near miss and participated in Root cause analysis
during investigation.
● Excellent Leadership quality.
● Knowledge of work safe online software
● Participant preparation of JSA for non routine activities
● Participate HAZOP from production side. .
● Plant comsssioning time participants HAZOP SOP varification,
HAZOP QA varification, PRE STARTUP SAFETY REVIEW.
● QMS awerneeas program during Plant startup.
● Initially varified log sheet & SOP update in YOKOGAWA DCS
sequence updating.
● Provides BOM detail to Given store and planning RM availability.
● Cordination QA Related documents (deviation control /change
control form) required from the production smoothly.
● Participate interlock graphics update DCS graphics and logsheet
upadte.
● Generating change from and MWO in plant
● Experience Tank farm with latest safety system .
PROJECT EXPERIENCE :
● New product BZCN in existing plant for modification in existing plant decontamination and commissioning and implications for change projects activity with documentation.
● Worked on commissioning & pre commissioning activity in Metribuzan plant manufacturing unit .
● Worked on commissioning fertilizer grade product
● ( Ammonium sulfate)
● Worked on commissioning activity in Triazinone plant which
is India's first manufacturing unit.
● Worked on nitration commissioning activity at Aarti industries
vapi.
PASSPORT NO. DATE OF ISSUE DATE OF EXPIRY PLACE OF ISSUE
: L-2420640 : 29-05-2013. : 28-05-2023. : GUJARAT
Passport (status)
AZAZ FARUKBHAI MANSUR
DECLARATION
I hereby declare that the above written particulars are true and correct to the best of my knowledge and belief.
AZAZ FARUKBHAI MANSUR
With Regards & Than
------------------------------
Project-Technical Support Engineer
First Name: Dennis
E-Mail Address: d6mild@aol.com
Country: United Kingdom
Phone: 07454669789
Job Position Applying For: Project/Technical Support Engineer
Current Job Title: Engineer
Total Years of Experience: 20
Copy your Resume / CV in this box: DENNIS. N. NLEMADIM
39 GRASMERE POINT, OLD KENT ROAD. LONDON SE15 1DU
MOBILE – 07454669789, Email : d6mild@aol.com
PERSONAL PROFILE
I am a well-organized, self-motivated, and focused person who can communicate effectively at all levels. I have a pleasant and outgoing personality with a good sense of humor. I can learn new skills quickly and I am looking to utilize my current skills and experience in the Electrical, Electronics, Communications, Solar Energy and Smart Technology industry as Project Support Officer/Consultant. Alternatively, I can apply my skills as a Customer/Production/Technical Support Engineer/Consultant. I am also prepared to transfer my skills and apply it in other engineering sectors and related Engineering and Engineering/Project Management roles.
KEY SKILLS
Experienced in using information technology tools such as Microsoft word packages e.g., Word, Access, Excel, Power Point and Microsoft Project
Competent in using special engineering computer aided design software or (CAD) such as Circuit PCB design software e.g., TINA and Multisim for Electronics. Also competent in the use of HOMER Energy for Renewable Energy Engineering. Able to learn new software for other applications.
Experience and knowledge in the use of software used for monitoring tracking units used in Fleet management for cars, vans and commercial vehicle fleet operators. (Telematics)
Experienced in electronic/mechanical technical skills such as Electrical/electronic wiring, reading schematic/ technical diagrams, PCB soldering, device testing and mechanical construction/assembly. Also, able to diagnose faults to components level.
Experience in the handling and maintenance of test equipment e.g., Oscilloscopes, Power Supplies, and Multi-meters. Also competent working with Electrical/Electronic equipment, repair/test stations.
Experienced in issues that require analytical, problem-solving, and troubleshooting as an individual event, when working in a team, on a project or on a given product including the compilation of fault-finding reports.
Ability to supervise, manage and investigate plans of a designated project /technical team and individual work.
Experience to deliver customer service skills, accustomed to providing services to meet customer needs and communicating effectively with them directly incorporating close attention to detail.
Experience working with an Asset Management System (AMS) and Customer Relations Management (CRM) system in a helpdesk/Support environment.
EDUCATION
2017 – 2019 Northumbria University Newcastle (London)
MSc Project Management
2012 – 2014 Kingston University London
Post Graduate Diploma (PG. Dip) - Renewable Energy Engineering (Commendation)
2004 – 2007 London Metropolitan University
B.Eng. (Hons) Electronics and Communications Engineering (2.1)
2001 – 2002 London Electronics College
BTEC Higher National Certificate (Electrical/Electronic Engineering) - Distinction
1999 – 2000 Southwark College
BTEC National Certificate (Engineering) - Distinction
1996 – 1998 Weymouth College
C&G Level 2 – Motor Vehicle Repair & Maintenance
EMPLOYMENT HISTORY
April 2022 – Till date
Acoustiguide UK. 2-3 North Mews. London. WC1N 2JP (Contract)
Electrical/Electronic Technician
Key role and responsibility:
Upgrade of Electronic device guides used for Museum tour guides.
Rebuild and construction of the Electronic device charging base.
April 2022 – September 2022
Visiontrack. 2 Chapman Way. High Brooms Industrial Estate. Tunbridge Wells. Kent TN2 3EF
Test Engineer
Key role and responsibility:
Working with the development team in the validation and testing of in-vehicle camera devices using the IOT (Internet of Things) platform.
Reporting to Chief Technical Officer and Head of Quality Assurance to demonstrate and submit user acceptance testing of the devices alongside its functionality when used in the end to end solution.
Perform real world in-vehicle and on the bench electronic device and software testing.
Prepare and compile concise and accurate data with formal test reports on devices tested.
Communicate and assist in the resolution of issues that arise or are found as a result of tests that were conducted for team projects and customer support.
Validate data retrieved from devices already set up and installed in Vehicles for test purposes
January 2022 – March 2022
Lime UK. Unit 3, Stockholm Road. Bermonsey. SE16 3LP (Contract)
Fleet Repair Operator/Technician
Key role and responsibilities:
Be responsible for the maintenance of e-scooters, e-bikes and e-Mopeds in Lime Warehouse
Perform all repairs and part replacement on mechanical and electronic components
Maximize the number of operational vehicles in the fleet
Solve problems by spotting issues with Scooters, Bikes and Mopeds
August 2018 – April 2021
Intratone UK Ltd. 114 Power Road Studios. Chiswick. W4 5PY London
Technical and Customer Support Specialist/Solutions Consultant
Key role and responsibility:
Responsible to perform the initial resolution of customer queries in relation to Wireless Video-Intercom product systems and related Access control kits and packages.
Provide solutions to product and service queries using company software to remotely set parameters, reset or update software to adjust functionality to solve issues with any Wireless Video Intercom system and Access Control systems.
Manage and support new access control and automation installation projects.
Manage, prioritize, and escalate issues within defined service level agreement for all levels of customers.
Close calls at the first point of contact where possible and provide customer updates as required and confirm resolution.
Gather additional details from customers to ensure timely problem resolution.
Provide customers advice and technical support on product suitability for their specified application
To manage, update and maintain Customer Relations Management system.
Manage, arrange, and conduct training of staff, Installers, and new/old customers on all products applicable to technical and sales.
September 2017 – February 2018
Alstom Transport. Highgate Depot. Woodside Avenue, East Finchley, London.N64 SS (Contract) Control Centre Support Operative
Key role and responsibility:
Monitoring and 24/7 Operation supports for the Rail and Trains for the London Underground train system with a Vehicle control centre (VCC) team (Northern Line).
Responsible for the safe operation of the remotely automated Vehicle on board computer (VOBC) Switchover process from a Transmission based train control (TBTC) signalling system in a System Management Centre (SMC).
Assigned responsibility for operations in VCC1-Morden to Stockwell and VCC7- Chalk farm to Hendon Central.
January 2017 – February 2017
Kentec Electronics Ltd. Units 25-27 Fawkes Avenue, Questor. Dartford. Kent. DA1 1JQ (Contract)
Production Technician-Engineer
Key role and responsibility within the Production department includes the following tasks and Projects:
Producing electric wiring looms, prototype wiring, assembling metal chassis and PCB assembly for Fire detection control systems.
Testing completed Fire detection control system products within the Production Department.
Offer production support with issues related to the various Fire detection control system products.
March 2016 – December 2016
Helvar Ltd. Hawley Mill, Hawley Road, Dartford. Kent. DA2 7SY (Contract)
Production Technician-Engineer
Key role and responsibility within the Production department includes the following tasks and Projects:
Working and assisting the Logistics team, producing electric wiring looms, prototype wiring, and assembling metal chassis with PCB assembly.
Program and test Lighting Control products within the Production Department.
Communicate effectively and offer production support with issues related to the various Lighting Control products.
January 2015 – Present day
Samuel Louis Solicitors. 17 Deptford Church Street. London. SE8 4RX (Freelance)
IT Support Engineer
Key role and responsibility within the Law Firm are:
Maintenance of Computers, printers, and computer networking system.
Resolving software and computer operational issues.
February 2015 – April 2015
West London Mental Health NHS Trust. Business Technology Directorate, 1st Floor, K Block. St Bernard's Hospital. Uxbridge Road, Southall, Middlesex. UB1 3EU (Contract)
Mobile Technology Project Officer
Key role and responsibility within the Business technology directorate included the following tasks and Projects:
To compile, administer, monitor, update and rearrange information for NHS registered mobile technology devices such as smart phones/ tablets/ laptops issued to the trust for NHS staff.
To work with service providers on data usage and specified airtime packages suitable for the staff.
Implement and conduct the mobile service provider migration project from EE to O2 with new tariff and billing structure.
Organize training and workshops for staff on device application usage.
Conduct customer support and technical support for issues with mobile technology devices.
April 2013 – September 2014
Cubic Transportation Systems Ltd. 8 Gatton Park Business Centre. Wells Place. Merstham, Redhill, Surrey. RH1 3DR (Contract)
Production Technician-Engineer.
Key role and responsibility within the Production department included the following tasks and Projects:
Hardware and Software upgrade of Passenger Validation Units (PVALS project) for Transport for London.
Testing Passenger Validation units (PVALs) and Active Radio Frequency Identification (RFID) readers/Near Field Communication (NFC) used in train and bus station gate systems.
Decommissioning of Old passenger validation units
Upgrading software of Master Modules for passenger validation units (MMs)
Automated/ Manual Testing and Software upgrade of Handheld Smart-card scanners (Revenue Inspection Device)
Completion of End of day reports for the duration of Projects undertaken.
Asset tracking management for the Handheld Smart-card scanners for revenue identification (RID project)
October 2012 – December 2012
Axell Wireless Ltd. Aerial House. Asheridge Road, Chesham, Buckinghamshire. HP5 2QD. (Contract)
Assembly Engineer (Cellular Repeaters).
Responsible for the arrangement and provision of construction/assembly kit for the production team
Performed the manual construction and assembly of a mobile communication cellular repeater with a team of Engineers following schematic diagrams.
Application of Electrical, electronic and mechanical assembly skills within a production and engineering team to fully couple and test the finished unit using special tools and automated test equipment.
Application of special simulation software to monitor and record all tests using enclosed radio frequency test facility for the cellular repeater modules.
January 2012– June 2012
Green Road Technologies Ltd, Fleet House. 8-12 New Bridge Street, London EC4 6AL.
Technical Support Engineer (Customer and Technical Support)
Responsible to perform the initial resolution of customer queries in relation to the Global Positioning System (GPS) service and GPS tracking unit issues.
Provide solutions to product and service queries using company software to remotely set parameters, reset or upgrade software to adjust functionality to solve issues with the unit.
Prioritize and escalate issues within defined service level agreement for corporate customers.
Close calls at the first point of contact where possible and provide customer updates as required and confirm resolution.
Gather additional details from customers to ensure timely problem resolution.
Provide customers advice and technical support on product suitability for their specified application
To manage the day-to-day interaction with the GPS installation partners.
February 2008 – December 2011
Digicore (Ctrack) Ltd, Sage House, 319 Pinner Road, Harrow, Middlesex HA1 4HF
Product Support Engineer (Operations/ Customer and Technical Support)
Responsible for the testing, troubleshooting, repair and allocation of tracking devices using GSM/GPRS Simulation Software.
Responsible for the software upgrade of hardware/software products on-site and remotely.
Assist and support field engineers and the Project Team, providing feedback and analysis on product queries.
Provide customers advice and technical support on product suitability for their specified application
Assist Customer and Technical Support department with troubleshooting queries from customers.
Send faulty units back to manufacturer.
2008
Kelvin Hughes Ltd. Voltage, Mollison Avenue Enfield EN3 7XQ United Kingdom (Contract)
Assembly Engineer (Marine Radar)
Conducted the construction of MOD Marine radar with a team of Technicians and Engineers with the use of special material, equipment, and components to build S and X bands frequency compliant radars.
2007 - 2008
Alcatel Submarine Networks. Greenwich. S.E. 10 (Contract)
Assembly Engineer (Optics).
Conducted the construction of an Optical repeater with a team of Engineers with the use of optic fiber, special tools and equipment using simulation software.
2001 – 2007
Carphone Warehouse Ltd (North Acton, London –W3 6RS)
Mobile Phone Service Engineer/ (Repairs and Technical) - Customer Service Advisor.
Responsible for Fault Finding and repair of various models of mobile phones
Conducted the management of the repair department and the ordering of parts, tools and equipment.
Offered Customer service at the main support center as Repairs/Technical Engineer/Advisor.
2000 – 2001
Alcatel Submarine Networks. Greenwich. S.E. 10 (Contract)
Engineering Technician operator
Conducted the construction of various electronic power supply-plates for optical repeaters according to order and specification.
CERTIFICATION
Construction Skills Certification Scheme (CSCS)
Electrotechnical Certification Scheme (ECS)
OTHER INFORMATION
I enjoy playing Table Tennis and watching Football. I also like to keep fit and enjoy assembling and fixing electrical/ electronic appliances and circuits. I also like to read anything that catches my interest.
Current Situation:
• Working privately as a Mathematics Tutor for 11+ and GCSE Students.
• Freelance/Independent Consultant (Solar Energy, Smart Technologies, Mineral resources)
• Working as IT Support Engineer (Freelance)
• Available for Contract /Permanent roles
REFERENCES AVAILABLE ON REQUEST.
E-Mail Address: d6mild@aol.com
Country: United Kingdom
Phone: 07454669789
Job Position Applying For: Project/Technical Support Engineer
Current Job Title: Engineer
Total Years of Experience: 20
Copy your Resume / CV in this box: DENNIS. N. NLEMADIM
39 GRASMERE POINT, OLD KENT ROAD. LONDON SE15 1DU
MOBILE – 07454669789, Email : d6mild@aol.com
PERSONAL PROFILE
I am a well-organized, self-motivated, and focused person who can communicate effectively at all levels. I have a pleasant and outgoing personality with a good sense of humor. I can learn new skills quickly and I am looking to utilize my current skills and experience in the Electrical, Electronics, Communications, Solar Energy and Smart Technology industry as Project Support Officer/Consultant. Alternatively, I can apply my skills as a Customer/Production/Technical Support Engineer/Consultant. I am also prepared to transfer my skills and apply it in other engineering sectors and related Engineering and Engineering/Project Management roles.
KEY SKILLS
Experienced in using information technology tools such as Microsoft word packages e.g., Word, Access, Excel, Power Point and Microsoft Project
Competent in using special engineering computer aided design software or (CAD) such as Circuit PCB design software e.g., TINA and Multisim for Electronics. Also competent in the use of HOMER Energy for Renewable Energy Engineering. Able to learn new software for other applications.
Experience and knowledge in the use of software used for monitoring tracking units used in Fleet management for cars, vans and commercial vehicle fleet operators. (Telematics)
Experienced in electronic/mechanical technical skills such as Electrical/electronic wiring, reading schematic/ technical diagrams, PCB soldering, device testing and mechanical construction/assembly. Also, able to diagnose faults to components level.
Experience in the handling and maintenance of test equipment e.g., Oscilloscopes, Power Supplies, and Multi-meters. Also competent working with Electrical/Electronic equipment, repair/test stations.
Experienced in issues that require analytical, problem-solving, and troubleshooting as an individual event, when working in a team, on a project or on a given product including the compilation of fault-finding reports.
Ability to supervise, manage and investigate plans of a designated project /technical team and individual work.
Experience to deliver customer service skills, accustomed to providing services to meet customer needs and communicating effectively with them directly incorporating close attention to detail.
Experience working with an Asset Management System (AMS) and Customer Relations Management (CRM) system in a helpdesk/Support environment.
EDUCATION
2017 – 2019 Northumbria University Newcastle (London)
MSc Project Management
2012 – 2014 Kingston University London
Post Graduate Diploma (PG. Dip) - Renewable Energy Engineering (Commendation)
2004 – 2007 London Metropolitan University
B.Eng. (Hons) Electronics and Communications Engineering (2.1)
2001 – 2002 London Electronics College
BTEC Higher National Certificate (Electrical/Electronic Engineering) - Distinction
1999 – 2000 Southwark College
BTEC National Certificate (Engineering) - Distinction
1996 – 1998 Weymouth College
C&G Level 2 – Motor Vehicle Repair & Maintenance
EMPLOYMENT HISTORY
April 2022 – Till date
Acoustiguide UK. 2-3 North Mews. London. WC1N 2JP (Contract)
Electrical/Electronic Technician
Key role and responsibility:
Upgrade of Electronic device guides used for Museum tour guides.
Rebuild and construction of the Electronic device charging base.
April 2022 – September 2022
Visiontrack. 2 Chapman Way. High Brooms Industrial Estate. Tunbridge Wells. Kent TN2 3EF
Test Engineer
Key role and responsibility:
Working with the development team in the validation and testing of in-vehicle camera devices using the IOT (Internet of Things) platform.
Reporting to Chief Technical Officer and Head of Quality Assurance to demonstrate and submit user acceptance testing of the devices alongside its functionality when used in the end to end solution.
Perform real world in-vehicle and on the bench electronic device and software testing.
Prepare and compile concise and accurate data with formal test reports on devices tested.
Communicate and assist in the resolution of issues that arise or are found as a result of tests that were conducted for team projects and customer support.
Validate data retrieved from devices already set up and installed in Vehicles for test purposes
January 2022 – March 2022
Lime UK. Unit 3, Stockholm Road. Bermonsey. SE16 3LP (Contract)
Fleet Repair Operator/Technician
Key role and responsibilities:
Be responsible for the maintenance of e-scooters, e-bikes and e-Mopeds in Lime Warehouse
Perform all repairs and part replacement on mechanical and electronic components
Maximize the number of operational vehicles in the fleet
Solve problems by spotting issues with Scooters, Bikes and Mopeds
August 2018 – April 2021
Intratone UK Ltd. 114 Power Road Studios. Chiswick. W4 5PY London
Technical and Customer Support Specialist/Solutions Consultant
Key role and responsibility:
Responsible to perform the initial resolution of customer queries in relation to Wireless Video-Intercom product systems and related Access control kits and packages.
Provide solutions to product and service queries using company software to remotely set parameters, reset or update software to adjust functionality to solve issues with any Wireless Video Intercom system and Access Control systems.
Manage and support new access control and automation installation projects.
Manage, prioritize, and escalate issues within defined service level agreement for all levels of customers.
Close calls at the first point of contact where possible and provide customer updates as required and confirm resolution.
Gather additional details from customers to ensure timely problem resolution.
Provide customers advice and technical support on product suitability for their specified application
To manage, update and maintain Customer Relations Management system.
Manage, arrange, and conduct training of staff, Installers, and new/old customers on all products applicable to technical and sales.
September 2017 – February 2018
Alstom Transport. Highgate Depot. Woodside Avenue, East Finchley, London.N64 SS (Contract) Control Centre Support Operative
Key role and responsibility:
Monitoring and 24/7 Operation supports for the Rail and Trains for the London Underground train system with a Vehicle control centre (VCC) team (Northern Line).
Responsible for the safe operation of the remotely automated Vehicle on board computer (VOBC) Switchover process from a Transmission based train control (TBTC) signalling system in a System Management Centre (SMC).
Assigned responsibility for operations in VCC1-Morden to Stockwell and VCC7- Chalk farm to Hendon Central.
January 2017 – February 2017
Kentec Electronics Ltd. Units 25-27 Fawkes Avenue, Questor. Dartford. Kent. DA1 1JQ (Contract)
Production Technician-Engineer
Key role and responsibility within the Production department includes the following tasks and Projects:
Producing electric wiring looms, prototype wiring, assembling metal chassis and PCB assembly for Fire detection control systems.
Testing completed Fire detection control system products within the Production Department.
Offer production support with issues related to the various Fire detection control system products.
March 2016 – December 2016
Helvar Ltd. Hawley Mill, Hawley Road, Dartford. Kent. DA2 7SY (Contract)
Production Technician-Engineer
Key role and responsibility within the Production department includes the following tasks and Projects:
Working and assisting the Logistics team, producing electric wiring looms, prototype wiring, and assembling metal chassis with PCB assembly.
Program and test Lighting Control products within the Production Department.
Communicate effectively and offer production support with issues related to the various Lighting Control products.
January 2015 – Present day
Samuel Louis Solicitors. 17 Deptford Church Street. London. SE8 4RX (Freelance)
IT Support Engineer
Key role and responsibility within the Law Firm are:
Maintenance of Computers, printers, and computer networking system.
Resolving software and computer operational issues.
February 2015 – April 2015
West London Mental Health NHS Trust. Business Technology Directorate, 1st Floor, K Block. St Bernard's Hospital. Uxbridge Road, Southall, Middlesex. UB1 3EU (Contract)
Mobile Technology Project Officer
Key role and responsibility within the Business technology directorate included the following tasks and Projects:
To compile, administer, monitor, update and rearrange information for NHS registered mobile technology devices such as smart phones/ tablets/ laptops issued to the trust for NHS staff.
To work with service providers on data usage and specified airtime packages suitable for the staff.
Implement and conduct the mobile service provider migration project from EE to O2 with new tariff and billing structure.
Organize training and workshops for staff on device application usage.
Conduct customer support and technical support for issues with mobile technology devices.
April 2013 – September 2014
Cubic Transportation Systems Ltd. 8 Gatton Park Business Centre. Wells Place. Merstham, Redhill, Surrey. RH1 3DR (Contract)
Production Technician-Engineer.
Key role and responsibility within the Production department included the following tasks and Projects:
Hardware and Software upgrade of Passenger Validation Units (PVALS project) for Transport for London.
Testing Passenger Validation units (PVALs) and Active Radio Frequency Identification (RFID) readers/Near Field Communication (NFC) used in train and bus station gate systems.
Decommissioning of Old passenger validation units
Upgrading software of Master Modules for passenger validation units (MMs)
Automated/ Manual Testing and Software upgrade of Handheld Smart-card scanners (Revenue Inspection Device)
Completion of End of day reports for the duration of Projects undertaken.
Asset tracking management for the Handheld Smart-card scanners for revenue identification (RID project)
October 2012 – December 2012
Axell Wireless Ltd. Aerial House. Asheridge Road, Chesham, Buckinghamshire. HP5 2QD. (Contract)
Assembly Engineer (Cellular Repeaters).
Responsible for the arrangement and provision of construction/assembly kit for the production team
Performed the manual construction and assembly of a mobile communication cellular repeater with a team of Engineers following schematic diagrams.
Application of Electrical, electronic and mechanical assembly skills within a production and engineering team to fully couple and test the finished unit using special tools and automated test equipment.
Application of special simulation software to monitor and record all tests using enclosed radio frequency test facility for the cellular repeater modules.
January 2012– June 2012
Green Road Technologies Ltd, Fleet House. 8-12 New Bridge Street, London EC4 6AL.
Technical Support Engineer (Customer and Technical Support)
Responsible to perform the initial resolution of customer queries in relation to the Global Positioning System (GPS) service and GPS tracking unit issues.
Provide solutions to product and service queries using company software to remotely set parameters, reset or upgrade software to adjust functionality to solve issues with the unit.
Prioritize and escalate issues within defined service level agreement for corporate customers.
Close calls at the first point of contact where possible and provide customer updates as required and confirm resolution.
Gather additional details from customers to ensure timely problem resolution.
Provide customers advice and technical support on product suitability for their specified application
To manage the day-to-day interaction with the GPS installation partners.
February 2008 – December 2011
Digicore (Ctrack) Ltd, Sage House, 319 Pinner Road, Harrow, Middlesex HA1 4HF
Product Support Engineer (Operations/ Customer and Technical Support)
Responsible for the testing, troubleshooting, repair and allocation of tracking devices using GSM/GPRS Simulation Software.
Responsible for the software upgrade of hardware/software products on-site and remotely.
Assist and support field engineers and the Project Team, providing feedback and analysis on product queries.
Provide customers advice and technical support on product suitability for their specified application
Assist Customer and Technical Support department with troubleshooting queries from customers.
Send faulty units back to manufacturer.
2008
Kelvin Hughes Ltd. Voltage, Mollison Avenue Enfield EN3 7XQ United Kingdom (Contract)
Assembly Engineer (Marine Radar)
Conducted the construction of MOD Marine radar with a team of Technicians and Engineers with the use of special material, equipment, and components to build S and X bands frequency compliant radars.
2007 - 2008
Alcatel Submarine Networks. Greenwich. S.E. 10 (Contract)
Assembly Engineer (Optics).
Conducted the construction of an Optical repeater with a team of Engineers with the use of optic fiber, special tools and equipment using simulation software.
2001 – 2007
Carphone Warehouse Ltd (North Acton, London –W3 6RS)
Mobile Phone Service Engineer/ (Repairs and Technical) - Customer Service Advisor.
Responsible for Fault Finding and repair of various models of mobile phones
Conducted the management of the repair department and the ordering of parts, tools and equipment.
Offered Customer service at the main support center as Repairs/Technical Engineer/Advisor.
2000 – 2001
Alcatel Submarine Networks. Greenwich. S.E. 10 (Contract)
Engineering Technician operator
Conducted the construction of various electronic power supply-plates for optical repeaters according to order and specification.
CERTIFICATION
Construction Skills Certification Scheme (CSCS)
Electrotechnical Certification Scheme (ECS)
OTHER INFORMATION
I enjoy playing Table Tennis and watching Football. I also like to keep fit and enjoy assembling and fixing electrical/ electronic appliances and circuits. I also like to read anything that catches my interest.
Current Situation:
• Working privately as a Mathematics Tutor for 11+ and GCSE Students.
• Freelance/Independent Consultant (Solar Energy, Smart Technologies, Mineral resources)
• Working as IT Support Engineer (Freelance)
• Available for Contract /Permanent roles
REFERENCES AVAILABLE ON REQUEST.
Civil Engineer
First Name: Mohd
E-Mail Address: erlateef53@gmail.com
Country: India
Phone: +917889766344
Job Position Applying For: Civil Engineer
Current Job Title: Junior engineer
Total Years of Experience: 3 years
Copy your Resume / CV in this box: MOHDLATEEFBHAT
+917889766344
Kunzer Baramulla, J&K, India-193404
erlateef53@gmail.com
erlateef.blogspot.com
OBJECTIVE
Seeking a challenging position in yourorganisation,whereicanputmyknowledge,skills and previous experience, to test andthus,learnabitmore,leadingtothegrowthof your organisation, which ultimately willleadtomypersonalgrowthalso.
SKILLS
Civil engineeringQualitycontrol(QC)
(Rigidpavement,Flexiblepavementand
Buildingconstruction)
Surveying
Site ExecutionAutoCAD
MSOceBilling
Reportwriting
EstimationandCosting(RateAnalysis)
ACTIVITIES
Iamapartofmanagementofalocalschoolasavolunteer.
DoneshorttermcoursesfromNITSrinagaron
;1."AdvancesinGeotechnicalengineeringforsustainable development". 2. "Disastermanagement" Received certicates ofappreciation,also.
3.QualiedGATE2023withascoreof472andAIR4781.
INTERESTS
Cricket ; Jogging in the free time ; Googlingthings ; Maintaining my orchard ; Taking careofmypetsinthesparetime,atmyhome.
LANGUAGE
EnglishHindi
EXPERIENCE
Amtechengineersandcontractors
Juniorengineer
WorkingontheconstructionofEkaaTVfactory,a100croreprojectasQCcumsiteengineer.
IamresponsibleforthesupervisionofconstructionofSTPtank,Watertank,PEBstructures,accessroad,buildingconstruction.Also, responsible for shuttering, earthwork, compaction,back
lling, waterproong, plastering, brick work, steel work, qualitycontrol, slump test,compression test,labour report, labourattendance,slumpandcubestrengthreportmaking,nextdayprogram,morningreportetc.
TensaIndia
SiteEngineer
ResponsiblefortheupkeepingofQualitystandardsinsidethecastingyard.
Daily testing on Coarse aggregates,ne aggregates, cementandsteel.
Checking the quality certicates of steel , tendons or anymaterialstobeusedonthesite.
Preparation of design mix at the site.Safe storageofdierentrawmaterials.
Checkingofsteelworkintheprestressgirder,accordingtothegivendrawingsbytheclient(L&T).
CubetestsoneverybatchofconcretebeingpouredintotheCastingmould.
Checkingoftheproleofductsforposttensioning,asperdrawingsgivenbyL&T.
Maintainingdailyattendanceoflabours.
ReportingtothePM,ondailybasis,givinghimthereportofqualitystandards,attendence,progressofworkandstatusofdierentrawmaterialsandfacilities.
JhelumconstructionsandengineeringpvtLtd
SiteEngineer
AsBuildingSiteEngineer: Site inspection ofengineeringworks(reinforcement, earthwork, foundation, drainage,infrastructure,scaolding,concreting,curing).
Preparing/providingofsupportdocumentationforprojectreportingprocess.
Monitorprogressofcivilcontractors.
Directconstruction,operationandmaintenanceactivitiesatprojectsite.
Work on construction drawing, specications andequipmentselection.
Layingoutthedrawings.
Checking of quality certi cates of steel and cement.Performingon-sitelabtestsofcement,Aggregates&water.AsAssistantRoadEngineer:
Assistedindevelopmentofroadwaygeometrics,pavement
designandpreparationofquantities.
Monitoring the cutting andlling of earthwork as perproposedgrade,bydesignteam.
Monitoringthetransportandthusquality,offoundationmaterial viz, subgrade, sub base, base course as per thespecications.
Performedtheon-siteandlabtestsviz.ofsoilsubgrade,Aggregates,Bitumenousconcrete,Bitumen,Tackcoat,Primecoat,Cement,Cementconcrete,PQCetc.
01/05/2023-
Present
20-05-2022-01-
05-2023
01-08-2020-17-
05-2022
Additionally,iwasassistedthesurveyteam,occasionally.
Responsiblefortheoverallcareandmonitoringofprojectswhetherthatberoadorbuildingstructures.
PROJECTS
ConstructionofEkaaTVfactory
A100croreprojectconsistingofSTPtank,Watertank,PEBinstallation,Roadworkandbuildingconstruction.
MAHSR(Mumbai-Ahmedabad-High-Speed-Rail)corridor.
Scope ofwork:Supplying prestressedgirdersofI andboxtype,to ourclientL&T.
ConstructionofresidentialVillasatKanispora,Bemina,AzadGunj&Drangbal.
Scopeofwork:Earthwork,foundationwork,
Steelwork,Scaolding,Concreting,Brickwork,QualitycontrolandSiteexecution.
ConstructionofaroadbetweenHardibaniandKrish-hama,underPMGSY.
Scopeofwork:Cutting&lling(Soil-subgrade)&Subbasework&Qualitycontrol.
EDUCATION
IITKanpur
GATE2023(AIR4781)
Score:472
SSMcollegeofengineering
B.E.CivilEngineering
Percentage:75%
CBSE
AIEEE(nowJEEmains)
Points:98
JKBOSE
SSC(XII)
Percentage:80.6%
JKBOSE
SC(X)
Percentage:92.6%
STRENGTHS
Problemsolving,Leadershipqualities,Teamwork,Analyticalthinker,Outofboxideas,Innovativeinapproach,Decisive&Mentallystrong.
Signature:
Mohd Lateef Bhat
Civil Engineer
First Name: syed kamran
E-Mail Address: asyedkamran@gmail.com
Country: Cyprus
Phone: +96898109426
Job Position Applying For: civil engineer
Current Job Title: civil engineer
Total Years of Experience: 5
Copy your Resume / CV in this box: Syed Kamran Ahmad
Site Engineer
Address Ghala Muscat, Sultanate of Oman
Phone +968 98109426, +968 78525741
E-mail asyedkamran@gmail.com
Total Experience : 5 Years (4 Years in Gulf)
License : Valid Omani Driving License (since 2018)
To seek and maintain full-time position that offers professional challenges utilizing interpersonal
skills, excellent time management and problem-solving skills. Talented Project Coordinator
focused on promoting team adaptability and cohesion. Meticulous attention to detail and
successful track record of accomplishing civil infrastructure projects on time and within budget
constraints. Knowledgeable about planning and executing projects.
Skills
(ABC+ Sub-Base + Subgrade) Laying
Drawing knowledge
Specification knowledge
Mountain Cutting & Blasting
Resource (Plant) Allocation & Usage
Project Management
Work History
Good
Good
Good
Good
Good
Good
2018-09
Current
Site Engineer
Shuaa Al Fath Golden Trading, Ghala Muscat
Reviewed scope of work as per signed sub-contract document.
Reviewed program of work prepared by planning engineer as per main contract
program.
Mobilization of resource + heavy machinery as per scope of work.
2021-09-
2022-06
Co-ordinate with main-contractor project manager for starting of work, arranging
of accommodation for operators, staff & workers, arrangement of diesel & water
resource for un-interrupted work to flow.
Co-ordinate with main-contractor project manager for issuance of approved IFC
drawings and specifications to ensure the compliance of works with the drawings
& specification.
Co-ordinate with main-contractor Land surveyor for joint survey approval of
drawings taken by our land surveyor on OGL, bench mark & control points to
ensure the compliance of works as per approved IFC drawings.
Obtained approvals for work at every stage from Consultant & Client Engineers
material samples from consultant at site by raising RFI's.
Monitor Planning and technical requirements to ensure the completion of the
same within time as well as within budget allocated by our QS.
Ensured materials and equipment utilization in optimum manner
Coordinated with sub-contractors and monitoring their progress at-site.
Project-Seih al Qatnah Road, Jebel al Akhdar
Contractor: Best Infrastructure Developer Company LLC. Value of Project: RO 3,000,000
Client: Ministry of Transportation & communication (MOTC)
Scope of Work: ABC+ GSB+ Subbase+ Crushing + Concrete Barrier
Job Responsibilities:
Reviewed scope of work as per signed sub-contract document.
Reviewed program of work prepared by planning engineer as per main contract
program.
Mobilization of resource + heavy machinery as per scope of work.
Co-ordinated with drilling & Blasting contractor for starting of drilling work,
attended the technical meeting, compliance with requirement, managed the
blasting activity complete in compliance with project requirement.
Co-ordinate with main-contractor project manager for starting of work, arranging
of accommodation for operators, staff & workers, arrangement of diesel & water
resource for un-interrupted work to flow.
Co-ordinate with main-contractor project manager for issuance of approved IFC
drawings and specifications to ensure the compliance of works with the drawings
& specification.
Co-ordinate with main-contractor Land surveyor for joint survey approval of
drawings taken by our land surveyor on OGL, bench mark & control points to
ensure the compliance of works as per approved IFC
drawings.
Obtained approvals for work at every stage from Consultant & Client Engineers
material samples from consultant at site by raising
RFI's.
Monitor Planning and technical requirements to ensure the completion of the
same within time as well as within budget allocated by our
QS.
2020-09 -
2021-09
Ensured materials and equipment utilization in optimum manner
Coordinated with sub-contractors and monitoring their progress at-site
Project- Al Nama Poultry Farm Dhank Ibri
Contractor: Oman Shapoorji Company LLC
Value of Project: RO. 432,000
Client: Al Nama Poultry SAOG
Scope of work: ABC+GSB+ Subbase+ Crushing,
2019-09 -
2020-09
Project-Oman Across Ages Museum (OAAM) Nizwa.
Contractor: SPML OSCO JV
Value of Project: RO. 1,124000
Client: Royal Court Affairs (RCA)
Scope of work: ABC+ GSB+ Subbase+ Crushing
2018-09 -
2019-09
Project -ROP Academy Nizwa
Main Contractor: Saif Al Harasi Contracting LLC
Value of Project: RO. 706,000
Client: Royal Oman Police (ROP)
Scope of work : Hill Cutting ,Crushing & Backfilling ,
Job Responsiblities:
Controlling and access on Manpower, Materials, Equipment's and vehicles.
Prepare managements DLR & DPR reports
Planning & Execution Day to day work at site with deadline
Coordination with Consultant and get Approval of Work at Every Stage
Actively take part in Quality Control
Conducting Project Progress Site meeting on Weekly Basis and Deciding the
Corrective Measure
Assist Project Manager in preparing detailed schedule and maintaining schedule
throughout the project.
Prepare site safety, security, and maintenance of traffic and storm water
pollution plans.
Prepare work sequence with detailed plan of attack utilizing work crews as
efficiently as possible prior to mobilization
Read, understand and interpret drawings and specifications.
Ensured documentations & verification of billings & invoices as per the company
policies
Education
2012-05 -
2016-05
Diploma : Civil Engineering
VET BVL Polytechnic - Bangalore
Software
Primavera P6
Ms Word
Ms Excel
Autocad
Languages
English
Hindi
Arabic
Average
Very Good
Very Good
Good
Good
Very Good
Average
------------------------------
Best regards,
Shabbir Kagalwala
dubai-forever.com
------------------------------
P.S. Also included is the user's IP address below, which we detect at the time the user submits the form. This verifies that each submission is from a unique visitor. Here it is...
37.41.51.227 (country unknown)
------------------------------
Senior Audio Engineer
First Name: RITESH
E-Mail Address: goldysae@yours.com
Country: India
Phone: 8108310701
Job Position Applying For: Sr.Audio Engineer
Current Job Title: Ass.Manager/ Sr Audio Engineer
Total Years of Experience: 20
Copy your Resume / CV in this box: Ritesh Trivedi
Sr.Audio Engineer
Mumbai, India 401107
(+91) 8108310701
goldysae@yours.com
LinkedIn: https://www.linkedin.com/in/ritesh-trivedi-2350451
WWW: https://www.dropbox.com/sh/21gsfd17io4gvf3/AACQgZx
WWW: https://bold.pro/my/ritesh-trivedi-230619072557/118
Professional Summary
Results-driven Experienced Audio Engineer/Sound Designer with forward-thinking approach centered on company success and competitive growth. Demonstrated record of success in building successful teams,managing profitable operations and working in d broadcast media & film industry for 20+ years
Skills
Excellent working knowledge in setup of audio equipment: digital mixers, amplifiers, microphones, loudspeakers, and related technology
Internet proficient, Pro Tools experience,knowledge of recording studio operations, television news broadcasting experience, audio encoding/decoding,multi-track board operation, music production, engineering, CD production
Complete knowledge and usage of: Windows and Macintosh environment , MS Word,PowerPoint and Excel.
Excellent organization and communication skills.
Strong work ethic, highly motivated and self-disciplined.
Project Management
Client Service
Work History
January 2022 - Current
Owner - Mumbai, India
Owner Inhouse Audio Studio / Freelancer
Track Laying/Sound designing/Mixing/Mastering for Television promos/Theatrical trailers/AV's/Advertisements/Podcast/Short films/Talk shows/Shoots etc.
Managed day-to-day audio broadcast requirements.
May 2015 - December 2021
Viacom18 Media Pvt. Ltd. - Mumbai, India
Asst.Manager (Sr.Audio Engineer)
Increased quality of customer experience by responding to audio system issues.
Managed project tasks and scheduling for technical staff.
Integrated foley elements into AV's and Shoots by syncing them with picture edits in Pro Tools.
Edited dialogue, music, and sound effect tracks for post-production projects.
Adjusted EQ settings on individual tracks to bring clarity to finished product.
Liaised with leadership to execute installation of audio equipment.
Delivered final products on time while adhering to strict deadlines set by clients.
Developed sound effects for various productions utilizing wide range of equipment.
Troubleshot audio systems and equipment, driving resolutions through to completion.
Set up multi-track recording sessions while ensuring proper microphone placement techniques were used.
Recorded voice-overs, background music, and sound effects with professional microphones.
Implemented creative solutions for difficult mixing scenarios that required problem solving skills.
Performed maintenance on recording gear such as mics, preamps, compressors and outboard gear.
Carried out routine testing of portable and installed equipment to diagnose, log and repair faults.
Created custom audio mixes for radio broadcasts and other media outlets.
Monitored health status of audio hardware and peripheral devices.
Processed audio files through noise reduction plugins such as iZotope RX7 Advanced suite.
Organized session data according to project specifications prior to mixing sessions.
Mastered and edited audio recordings using Pro Tools software.
Monitored levels throughout mixing process to ensure quality control standards were met.
Gathered feedback from clients after mastering sessions which helped inform future projects.
Suggested new methods and techniques to improve efficiency.
Troubleshot technical issues that arose during tracking and mixing sessions with quick precision.
Collaborated with producers to create optimal sonic results in studio environment.
Provided technical guidance to junior members of team regarding design principles, coding conventions and best practice.
June 2012 - May 2015
Prime Focus Technologies Ltd. - Mumbai, India
Sr.Audio Engineer
Enhanced sound quality and added various sound effects to promos/ad's.
Performed sound quality checks and front-of-house mixing to maintain company sound system.
Regulated volume level and sound quality during recording sessions.
Set up and tested equipment prior to events, broadcasts, and recordings.
Set up multi-track recording sessions while ensuring proper microphone placement techniques were used.
Recorded voice-overs, background music, and sound effects with professional microphones.
Successfully managed team of 10 engineers to develop complex sound designing and mixing projects
January 2008 - June 2012
Turner General Entertainment Television Network Ltd - Mumbai, India
Sr. Audio Engineer
Set up multi-track recording sessions while ensuring proper microphone placement techniques were used.
Sound designed , mixed promos/ AV's for channels -HBO/Warner brothers-WB/Imagine TV/Lumiere Movies/Cartoon network/POGO
Adjusted EQ settings on individual tracks to bring clarity to finished product.
Collaborated with producers to create optimal sonic results in studio environment.
Gathered feedback from clients after mastering sessions which helped inform future projects.
March 2005 - December 2007
Sahara One Media and Entertainment Television Pvt. Ltd - Mumbai, India
Sr. Audio Engineer
Played important role in upbringing of present Audio recording and mixing studio right from acoustic of room to final cabling of machine
Liaised with leadership to execute installation of audio equipment.
Monitored health status of audio hardware and peripheral devices.
Implemented creative solutions for difficult mixing scenarios that required problem solving skills.
Suggested new methods and techniques to improve efficiency.
Edited dialogue, music, and sound effect tracks for post-production projects.
Mastered and edited audio recordings using Pro Tools, Neundo software.
Developed sound effects for various productions utilizing a wide range of equipment.
Processed audio files through noise reduction plugins such as iZotope RX7 Advanced suite.
Recorded voice-overs, background music, and sound effects with professional microphones
Adjusted EQ settings on individual tracks to bring clarity to finished product.
Set up multi-track recording sessions while ensuring proper microphone placement techniques were used.
Delivered final products on time while adhering to strict deadlines set by clients.
Gathered feedback from clients after mastering sessions which helped inform future projects.
Performed sound quality checks and front-of-house mixing to maintain company sound system.
Set up and tested equipment prior to events, broadcasts, and recordings.
Prepared for recording sessions by selecting and setting up microphones.
Regulated volume level and sound quality during recording sessions.
January 2003 - March 2005
Set India Pvt.Ltd.(Sony TV) - Mumbai, India
Audio Engineer
Worked on Foley, Background and Mixing and Sound designing for Movies played on extra slots
Sound Designing and mixing for Promotional Videos
Broadband noise Reduction for various movies
Dubbing, Track Laying, Mixing for various AV, Launch Episodes etc.
Established strong relations with clients by giving them timely deliveries.
January 2003 - March 2005
Freelance Audio Engineer - Mumbai, India
Freelance Audio Engineer
Sound designed for movies 'Mangal Pandey /,'15 Park Avenue' and 'Mixed doubles'
Dubbed and matched 'The hero' , 'Calcutta mail ' , Parineeta , 'Maine pyar kyu kiya' etc.
Dubbed and mixed various Regional languages movies for Star gold and other channels.
Location recording for various shoots and movies
Promotions (promos sound designed and mixing) for various bollywood movies i.e 'Dus' , 'Shootout at wadala' etc.
Mixing of various television series.
January 2002 - December 2002
Star India Pvt. Ltd - Mumbai, India
Asst. Audio Engineer
Dubbed and Mixed for Aasma (Channel [V] Pop Stars
Sound Design and Mixing of Promos
Dubbing, Track Laying, Mixing for Star Plus, Star Plus Ad Sales, Star Plus U.K, Channel [V] and Star Gold
Established trust among producers.
Education
January 2020 - April 2021
Ivon On Tech Academy Sweden
Diploma Blockchain
January 2000 - January 2001
SAE Technology College Chennai
Audio Engineering Diploma Audio Mixing, Sound Desiging,Broadcast Sound,DAW
January 1996 - December 1999
Govt.Polytechnique College Jaora
3 Years Diploma Mechanical Engineering
January 1996 - December 1996
Kendriya Vidhalaya Neemuch
High School Diploma
Garde 12th (Science) - Physics, Chemistry, Mathemetics, Biology
Accomplishments
Best Sound Mixing Promax BDA Award 2005 - Sahara one Media & Entertainment television
Best Sound Designing Asia Promax Award 2006 - Filmy Channel (Sahara one media & Entertainment Television)
Zee5 Channel launch - Audio Dubbing/Designing/Mixing
Hotstar OTT Launch - Audio Dubbing/Designing/Mixing
ISDN Recording for Star world channel with Telos Zephyr
Imagine TV Channel launch - Audio Dubbing/Designing/Mixing
Lumiere Movies (European English Movies Channel) - Audio Dubbing/Designing/Mixing
HBO Movie channel India launch - Audio Dubbing/Designing/Mixing
WB(Warner Brothers) India launch - Audio Dubbing/Designing/Mixing
Rishtey Cineplex Movie Channel launch -Viacom 18 media & Entertainment - Audio Dubbing/Designing/Mixing/Shoots
E-Mail Address: goldysae@yours.com
Country: India
Phone: 8108310701
Job Position Applying For: Sr.Audio Engineer
Current Job Title: Ass.Manager/ Sr Audio Engineer
Total Years of Experience: 20
Copy your Resume / CV in this box: Ritesh Trivedi
Sr.Audio Engineer
Mumbai, India 401107
(+91) 8108310701
goldysae@yours.com
LinkedIn: https://www.linkedin.com/in/ritesh-trivedi-2350451
WWW: https://www.dropbox.com/sh/21gsfd17io4gvf3/AACQgZx
WWW: https://bold.pro/my/ritesh-trivedi-230619072557/118
Professional Summary
Results-driven Experienced Audio Engineer/Sound Designer with forward-thinking approach centered on company success and competitive growth. Demonstrated record of success in building successful teams,managing profitable operations and working in d broadcast media & film industry for 20+ years
Skills
Excellent working knowledge in setup of audio equipment: digital mixers, amplifiers, microphones, loudspeakers, and related technology
Internet proficient, Pro Tools experience,knowledge of recording studio operations, television news broadcasting experience, audio encoding/decoding,multi-track board operation, music production, engineering, CD production
Complete knowledge and usage of: Windows and Macintosh environment , MS Word,PowerPoint and Excel.
Excellent organization and communication skills.
Strong work ethic, highly motivated and self-disciplined.
Project Management
Client Service
Work History
January 2022 - Current
Owner - Mumbai, India
Owner Inhouse Audio Studio / Freelancer
Track Laying/Sound designing/Mixing/Mastering for Television promos/Theatrical trailers/AV's/Advertisements/Podcast/Short films/Talk shows/Shoots etc.
Managed day-to-day audio broadcast requirements.
May 2015 - December 2021
Viacom18 Media Pvt. Ltd. - Mumbai, India
Asst.Manager (Sr.Audio Engineer)
Increased quality of customer experience by responding to audio system issues.
Managed project tasks and scheduling for technical staff.
Integrated foley elements into AV's and Shoots by syncing them with picture edits in Pro Tools.
Edited dialogue, music, and sound effect tracks for post-production projects.
Adjusted EQ settings on individual tracks to bring clarity to finished product.
Liaised with leadership to execute installation of audio equipment.
Delivered final products on time while adhering to strict deadlines set by clients.
Developed sound effects for various productions utilizing wide range of equipment.
Troubleshot audio systems and equipment, driving resolutions through to completion.
Set up multi-track recording sessions while ensuring proper microphone placement techniques were used.
Recorded voice-overs, background music, and sound effects with professional microphones.
Implemented creative solutions for difficult mixing scenarios that required problem solving skills.
Performed maintenance on recording gear such as mics, preamps, compressors and outboard gear.
Carried out routine testing of portable and installed equipment to diagnose, log and repair faults.
Created custom audio mixes for radio broadcasts and other media outlets.
Monitored health status of audio hardware and peripheral devices.
Processed audio files through noise reduction plugins such as iZotope RX7 Advanced suite.
Organized session data according to project specifications prior to mixing sessions.
Mastered and edited audio recordings using Pro Tools software.
Monitored levels throughout mixing process to ensure quality control standards were met.
Gathered feedback from clients after mastering sessions which helped inform future projects.
Suggested new methods and techniques to improve efficiency.
Troubleshot technical issues that arose during tracking and mixing sessions with quick precision.
Collaborated with producers to create optimal sonic results in studio environment.
Provided technical guidance to junior members of team regarding design principles, coding conventions and best practice.
June 2012 - May 2015
Prime Focus Technologies Ltd. - Mumbai, India
Sr.Audio Engineer
Enhanced sound quality and added various sound effects to promos/ad's.
Performed sound quality checks and front-of-house mixing to maintain company sound system.
Regulated volume level and sound quality during recording sessions.
Set up and tested equipment prior to events, broadcasts, and recordings.
Set up multi-track recording sessions while ensuring proper microphone placement techniques were used.
Recorded voice-overs, background music, and sound effects with professional microphones.
Successfully managed team of 10 engineers to develop complex sound designing and mixing projects
January 2008 - June 2012
Turner General Entertainment Television Network Ltd - Mumbai, India
Sr. Audio Engineer
Set up multi-track recording sessions while ensuring proper microphone placement techniques were used.
Sound designed , mixed promos/ AV's for channels -HBO/Warner brothers-WB/Imagine TV/Lumiere Movies/Cartoon network/POGO
Adjusted EQ settings on individual tracks to bring clarity to finished product.
Collaborated with producers to create optimal sonic results in studio environment.
Gathered feedback from clients after mastering sessions which helped inform future projects.
March 2005 - December 2007
Sahara One Media and Entertainment Television Pvt. Ltd - Mumbai, India
Sr. Audio Engineer
Played important role in upbringing of present Audio recording and mixing studio right from acoustic of room to final cabling of machine
Liaised with leadership to execute installation of audio equipment.
Monitored health status of audio hardware and peripheral devices.
Implemented creative solutions for difficult mixing scenarios that required problem solving skills.
Suggested new methods and techniques to improve efficiency.
Edited dialogue, music, and sound effect tracks for post-production projects.
Mastered and edited audio recordings using Pro Tools, Neundo software.
Developed sound effects for various productions utilizing a wide range of equipment.
Processed audio files through noise reduction plugins such as iZotope RX7 Advanced suite.
Recorded voice-overs, background music, and sound effects with professional microphones
Adjusted EQ settings on individual tracks to bring clarity to finished product.
Set up multi-track recording sessions while ensuring proper microphone placement techniques were used.
Delivered final products on time while adhering to strict deadlines set by clients.
Gathered feedback from clients after mastering sessions which helped inform future projects.
Performed sound quality checks and front-of-house mixing to maintain company sound system.
Set up and tested equipment prior to events, broadcasts, and recordings.
Prepared for recording sessions by selecting and setting up microphones.
Regulated volume level and sound quality during recording sessions.
January 2003 - March 2005
Set India Pvt.Ltd.(Sony TV) - Mumbai, India
Audio Engineer
Worked on Foley, Background and Mixing and Sound designing for Movies played on extra slots
Sound Designing and mixing for Promotional Videos
Broadband noise Reduction for various movies
Dubbing, Track Laying, Mixing for various AV, Launch Episodes etc.
Established strong relations with clients by giving them timely deliveries.
January 2003 - March 2005
Freelance Audio Engineer - Mumbai, India
Freelance Audio Engineer
Sound designed for movies 'Mangal Pandey /,'15 Park Avenue' and 'Mixed doubles'
Dubbed and matched 'The hero' , 'Calcutta mail ' , Parineeta , 'Maine pyar kyu kiya' etc.
Dubbed and mixed various Regional languages movies for Star gold and other channels.
Location recording for various shoots and movies
Promotions (promos sound designed and mixing) for various bollywood movies i.e 'Dus' , 'Shootout at wadala' etc.
Mixing of various television series.
January 2002 - December 2002
Star India Pvt. Ltd - Mumbai, India
Asst. Audio Engineer
Dubbed and Mixed for Aasma (Channel [V] Pop Stars
Sound Design and Mixing of Promos
Dubbing, Track Laying, Mixing for Star Plus, Star Plus Ad Sales, Star Plus U.K, Channel [V] and Star Gold
Established trust among producers.
Education
January 2020 - April 2021
Ivon On Tech Academy Sweden
Diploma Blockchain
January 2000 - January 2001
SAE Technology College Chennai
Audio Engineering Diploma Audio Mixing, Sound Desiging,Broadcast Sound,DAW
January 1996 - December 1999
Govt.Polytechnique College Jaora
3 Years Diploma Mechanical Engineering
January 1996 - December 1996
Kendriya Vidhalaya Neemuch
High School Diploma
Garde 12th (Science) - Physics, Chemistry, Mathemetics, Biology
Accomplishments
Best Sound Mixing Promax BDA Award 2005 - Sahara one Media & Entertainment television
Best Sound Designing Asia Promax Award 2006 - Filmy Channel (Sahara one media & Entertainment Television)
Zee5 Channel launch - Audio Dubbing/Designing/Mixing
Hotstar OTT Launch - Audio Dubbing/Designing/Mixing
ISDN Recording for Star world channel with Telos Zephyr
Imagine TV Channel launch - Audio Dubbing/Designing/Mixing
Lumiere Movies (European English Movies Channel) - Audio Dubbing/Designing/Mixing
HBO Movie channel India launch - Audio Dubbing/Designing/Mixing
WB(Warner Brothers) India launch - Audio Dubbing/Designing/Mixing
Rishtey Cineplex Movie Channel launch -Viacom 18 media & Entertainment - Audio Dubbing/Designing/Mixing/Shoots
Subscribe to:
Posts (Atom)