Candidate

------------------------------
First Name: Olumide
E-Mail Address: olumidelawson@gmail.com
Country: Nigeria
Phone: 08023030461
Current Job Designation: Senior Civil/Structural Engineer
Job Designation Applying For: Principal Civil/Structural Engineer
Total Years of Experience: 25
Copy your Resume / CV in this box: ENGR. LAWSON OLUMIDE FELIX
PLOT 248 Road 113 GOWON, F.H.A EGBEDA LAGOS STATE, NIGERIA
Tel: 08023030461, 08051320740
E-mail: folixmaj @yahoo.com; olumidelawson@hotmail.com

________________________________________
CIVIL/STRUCTURAL ENGINEER
________________________________________
PROFILE

Olumide has over 20 years' experience in front end engineering design, detail engineering design, project management, shop fabrication & installation. His work has had him doing stints at Strabag Construction, Bolstructs Projects, Flour Corporation, CASS Consultants, Dorman Long Engineering Limited, Makon Engineering & Technical Services limited, Seflam SGL and ND Western Production & Exploration Company. He has been involved on challenging projects with SPDC, Exxon Mobil, Hyundai Heavy Industries, SNEPCO, Total, Chevron, Addax Petroleum, Daewoo etc.

Experienced also in Project Management, Engineering Design & Development, Engineering Coordination, Fabrication and Construction Supervision of both Concrete and Steel Structures, as well as Inspection of shop fabrication activities. I have very good understanding of Onshore & Offshore structural engineering design & detailing for shop fabrication and installation. I am versatile in the use of AutoCAD, Microsoft softwares (Excel, Word, and Project) and some other design softwares (Staad Pro, SACS, FEA, COMPRESS, Prokon, PDMS etc.). I have good working Knowledge of international codes like Eurocodes, BS 8110, BS5950-1:1990/2000, API 650, ASME SECTION VIII DIV. 1 & 2, PD 5500, BS EN 14015:2004, AISC, ASTM, AWSD1.1, API, CP110, BS 6399 etc. I am also a good team player.

He is a member of Nigerian Institution of Civil Engineers (MNICE), Corporate member of Nigeria Society of Engineers (MNSE), Associate member American Society of Civil Engineers (MASCE) and a registered engineer with the Council for the Regulation of Engineering in Nigeria (COREN).________________________________________
PROFESSIONAL EXPERIENCE AND ACCOMPLISHMENTS

ND WESTERN LIMITED (EXPLORATION & PRODUCTION COMPANY) SEPTEMBER 2023-Present
Senior Civil/Structural Engineer

 Senior Project Engineer for ND Western/NEPL for 60 Rooms FLB Building Construction Project.
 Coordinate and support Civil/Structural works for Produced Water Handling Project.
 Responsible for all Civil/Structural deliverables in executing UPS BYPASS ALTERNATIVE CRUDE EVACUATION PROJECT (INTEGRATED WITH OML34 WATER HANDLING PROJECT)
 Responsible for all Civil/Structural deliverables in FEED Engineering for Warri River Terminal Project.
 Responsible for all Civil/Structural deliverables for Utorogu Flow-station Expansion Project.
 ND Western Engineering representative for Optimera Energy LFZE Consortium.
 Coordination of all engineering project activities for Engineering, Procurement and Construction for Natural Gas Supply and Distribution Pipeline Infrastructure and City Gate Station Project for the Lagos Free Trade Zone (Optimera Energy LFZE).
 Coordinates and support Well Location Preparations.
 Coordination of all project activities and interface e.g. preparation of budget, schedule control, cost control, project management, HSE, management of Contractors, host community management etc.
 Preparing project scope of works.
 Providing technical advice on design of major projects.
 Managing the company's Civil/Structural team and Supervision of designs done by junior engineers and subcontractors.
 Reviewing and signing off on the Civil/Structural design deliverables done by the subcontractors as a confirmation that design is optimum.
 Delivering technical support in multi-disciplinary teams.
 Provision of on-ground Engineering support during installation.
 Ensuring strict adherence to installation in accordance with AFC drawings.
 Coordinate Civil interfaces with other disciplines.
 Undertaking Site visits.
 Supervise construction of Equipment Foundation and concrete foundation for Pipe rack, Pipe supports and Pipe Sleepers pedestal.
 Involved in FEED review, HAZOP review meetings, Topography Survey review, Constructability review, 3D model review, deliverables close-out review etc.
 Overseeing delivery from Contractors.
 Supporting repair and maintenance of infrastructure projects for intervention works.
 Selecting and recommending the best technical solution.




SEFLAM SGL LIMITED (EPIC COMPANY) APRIL 2022-AUGUST 2023
Lead Civil/Structural Engineer

 Involved in executing GBARAN PHASE 3B - UZU WITH CPF UPGRADE- PKG 2 FACILITIES PROJECT
 Preparing reports, designs, and drawings (calculations about loads, stresses etc.)
 Providing technical advice and ensure selection of appropriate construction materials during design.
 Managing the company's Civil/Structural team and Supervision of designs done by junior engineers and subcontractors
 Understanding all projects work scope and limit the design to fit-for-purpose only, without going overboard with technical specifications.
 Signing off on the design done by the subcontractors as a confirmation that design is optimum.
 Mobilizing to the fabrication yard for general oversight functions on the fabrication of civil/structural items on completion of engineering.
 Provision of on-ground Engineering support during installation.
 Ensuring strict adherence to installation in accordance with AFC drawings.
 Coordinate Civil interfaces with other disciplines/professions.
 Participate in audits of the different project phases.
 Supervise construction of Equipment Foundation and concrete foundation for Pipe rack, Pipe supports and Pipe Sleepers pedestal.
 Involved in foundation design calculation of equipment support structures, foundation base for skid packages, reciprocating equipment, Compressor foundation, flare stack foundation, tanks, MCC & FAR buildings, various steel structural elements, pile foundation design etc.
 Involved in FEED review, Client's specifications review, Basis of Design (BFD), Bathymetry Survey Review, Geotechnical Survey report review, HAZOP review meetings, Topography Survey review, Constructability review, 3D model review, deliverables close-out review, MTO (Material Take-off) review, BOM review etc.
 Monitor concrete cubes for testing according to the testing requirements and industry codes.
 Reviews test reports and document all results/report
 Inspect and approve all earth works and concrete procedures.
 Witness compressive strength and field density tests.
 Review and approve route survey or existing right of way to re-establish the beacon points.
 Coordinating generation and review of detailed & shop drawings for approvals and construction.
 Involved in Interdisciplinary checks & squad checks.
 Carrying out structural parts fabrication checks to meet client's requirements.
 Preparing weekly engineering progress report, monthly engineering project progress report & deliverables dashboard.
 Participate in site meetings to address technical issues, project meetings & client's meetings.
 Participate in project site supports during constructions/installations.
 Mentoring of junior/intermediate engineers


MAKON ENGINEERING & TECHNICAL SERVICES LTD (EPICOM COMPANY) AUG 2011-March 2022
Lead Civil/Structural Engineer

 Involved in executing NLNG CCR Upgrade Project for NLNG at Bonny Island
 Involved in executing the DOMGas (Gas Compression Facilities) EPIC Projects for Shell Petroleum Development Company of Nigeria (SPDC).
 Involved in executing the Associated & Non-Associated Gas Facilities EPIC Project – Agbada NAG & AG for Shell Petroleum Development Company Limited (SPDC).
 Involved in executing the Associated & Non-Associated Gas Facilities EPIC Project – Utorogu NAG for Shell Petroleum Development Company Limited (SPDC).
 Involved in executing the Non-Associated Gas Facilities EPIC Project – Egbema West (AG & NAG) for Nigerian Petroleum Development Company Limited (NPDC).
 Involved in executing the Gas Compression Facilities Project – Sapele AG for Seplat Petroleum Development Company Limited.
 Contributed to the ongoing development of the project control infrastructure, within the organization framework, leading specific projects as required.
 Collaborating with the Engineering Manager in planning & control of engineering deliverables management for facilitating milestone payments.
 Involved in foundation design calculation of equipments support structures, foundation base for skid packages, reciprocating equipments, Compressor foundation, flare stack foundation, tanks, MCC & FAR buildings, various steel structural elements, pile foundation design etc.
 Involved in FEED review, Client's specifications review, Basis of Design (BFD), Bathymetry Survey Review, Geotechnical Survey report review, HAZOP review meetings, Topography Survey review, Constructability review, 3D model review, deliverables close-out review, MTO (Material Take-off) review, BOM review etc.
 Coordinating generation and review of detailed & shop drawings for approvals and construction.
 Involved in Interdisciplinary checks & squad checks.
 Carrying out structural parts fabrication checks to meet client's requirements.
 Preparing weekly engineering progress report, monthly engineering project progress report & deliverables dashboard.
 Participate in site meetings to address technical issues, project meetings & client's meetings.
 Participate in project site supports during constructions/installations.
 Mentoring of junior/intermediate engineers


DORMAN LONG ENGINEERING LTD, NIGERIA (EPIC/FABRICATION) MAR 2005-JUL 2011
Lead Design Engineer

 Worked in close coordination with the Project Manager in planning & control of project engineering deliverables.
 Involved in FEED review, Client's specifications review, Basis of Design (BFD), Bathymetry Survey Review, Geotechnical Survey report review, HAZOP review meetings, Topography Survey review, Constructability review, 3D model review, Risk Assessment review, deliverables close-out review, MTO (Material Take-off) review, BOM review etc.
 Prepare design basis, design reports and calculations as part of deliverables.
 Involved in Proposal/Inquiry/ bid documents, man-hour estimate and tendering.
 Offshore Fixed Platform Structural Assessment (Green Field and Brown Field Scope).
 Fixed jacket Platform design including Topsides, Substructures, pile, and bridges.
 Carried out Structural analyses such as In-place, Lifting, Transportation, Fatigue, On-bottom e.tc
 Perform structural analysis and design of deck extension & various structural elements using SACS and STAAD
 Transportation and Sea-fastening analysis
 Padeye design against nominal and extreme loads, including out of plane bending moments, dynamic coefficient, and consequence factors
 Preparation of Pressure vessels mechanical strength calculation to ASME Sect. VIII Div. 1&2 and PD5500 using Compress or PV Elite softwares
 Condensate tank design calculation
 Liaised with the sub-contractor through the project representative.
 Supervised preparation of detailed & shop fabrication drawings for approvals & construction.
 Coordinated preparation of administrative procedures for engineering department.
 Prepare timely response to technical queries from vendors and contractors and from other Company departments
 Involved in Interdisciplinary checks & squad checks.
 Preparing weekly engineering progress report, monthly engineering project progress report & deliverables dashboard.
 Participate in site meetings to address technical issues, project meetings & client's meetings.
 Participate in project site supports during constructions/installations.
 Mentoring of junior/intermediate engineers
 Engineering Lead for ASME U, R, S, PP & U2 stamps certification


CASS CONSULTANT, NIGERIA (CONSULTANCY FIRM) SEPT 2002-FEB 2005
Design Engineer

 Conceptualization design, analysis & design of building structural elements.
 Preparation of working drawings
 Issuing of approved drawings for necessary statutory approvals
 Project document review
 Preparation of Bill of Quantities (BOQ), bending schedule etc.
 Site visit and supervision of constructional activities.
 Monitored quantities and progress of the work, facilitated project control support, and participated in daily, weekly and monthly meeting.
 Monitored the construction planning and equipment scheduling & allocation to the project conforming to the project schedule and contract requirements.
 Ensured rigorous follow up on construction methodology and finalized the same by consulting with the contractor.
 Evaluation & Appraisal of existing structures e.g building, bridges
 Attend site meetings & project progress reporting.


RECOM NIGERIA LIMITED (CONSULTANCY COMPANY) AUGUST 2001-AUGUST 2002
Site Resident Engineer

 Developed totally integrated EPC Cost programs.
 Prepared the Work Breakdown and Project Cost Coding Structures for control and integrity of work to be performed as defined by the contract.
 Managed all ongoing updates and schedule impacts (interface milestones), progress tracking and revision of existing schedules for all EPC activities.
 Direct supervision of construction of drainage system & erosion control works.
 Preparation of interim certificates of payment.
 Established the progress measuring procedures, preparation of regular project status reports.
 Implemented the project planning, controls and project scheduling best practices through detailed design and during project execution and completion.
 Generated and updated contractual notification schedules to subcontractors.
 Analyzed estimated quantities, man-hours, and cost data for all segments of work in support of project plan development and performance measurement system.
 Monitored and Reported Non-Productive Man-hours and Indirect (support) Man-hours expended at site.
Supported the estimating process, and worked with the estimating team, ensure that estimates are as robust as possible.



BOLSTRUCT PROJECTS LTD, NIGERIA (CONSTRUCTION COMPANY) FEB 2000-JUL 2001
Site Engineer

 Responsible for the coordination of the input for the company resource planning, coordination of the project input for Engineering, Procurement, and fabrication.
 Generated and updated contractual notification schedules to subcontractors.
 Reviewed Sub-contractor's procedures for estimating, scheduling and project controls and modifies as necessary to meet the project objectives.
 Analyzed estimated quantities, man-hours, and cost data for all segments of work in support of project plan development and performance measurement system.
 Preparation of Bill of Quantities (BOQ), bending schedule etc.
 Site supervision of constructional activities.
 Generated weekly and monthly progress reports against actual progress.
 Coordination of subcontractors & suppliers



STRABAG CONSTRUCTION LTD, ABUJA NIGERIA (NYSC) (CONSTRUCTION COMPANY) JAN 1999-FEB 2000
Training Engineer

 Supervision of precast structural elements for roads & bridge construction Projects.
 Generation of Concrete design mix ratio for various project sites.
 Participated in laboratory concrete cube strength test, cone penetration, Atterberg limits test etc
 Site coordination.
 Supervision of precast concrete elements load out
 Inter-phase with other construction teams.
 Attend site & team meetings.

________________________________________
KEY PROJECTS

 EPC for Gbaran Phase 3b – UZU with CPF Upgrade – Package 2 Facilities
 NLNG CCR Upgrade Project at Bonny Island
 Gas Compression Facilities EPC Project – Egbema West for Nigerian Petroleum Development Company Limited (NPDC)
 DOMGas EPICOM Project – Agbada NAG & AG, Utorogu NAG2, Ughelli East & West Flow Stations for Shell Petroleum Development Company Nigeria
 OYOT Platform Construction – EPC project for MPN (Mobil Producing Nigeria)
 Meji GGCP Helideck Extension – EPC for CNL (Chevron Nigeria Limited)
 SNEPCO BONGA BUOY Boat Catcher – EPCI for SNEPCO
 Fire fighting Systems with Deck extension of Obudu Platform – EPIC for TOTAL E&P Nigeria Ltd
 Refurbishment of Helideck & Top Deck Structure of Master P Platform – Construction & Installation for Conoil Nigeria
 Ovade-Ogharafe Flow-station Upgrade and Debottle Necking – EPIC for Pan-Ocean Oil Corporation
 Gbaran Ubie Integrated Oil & Gas project – EPC for SPDC (Shell Petroleum Development Company)
 Manifolds Skids for Santa Barbara & Nembe Creek II Flow-station – EPC for SPDC (Shell Petroleum Development Company)
 Further Oil Development Project (Five Inlet Manifold & Four Gas Lift Manifold skids) for Cawthorne Channel – EPC for SPDC (Shell Petroleum Development Company)
 OML 58 Upgrade Phase – 1, EPC Project for HHI (Heavy Hyundai Industry)
 ODIDI Gas-Link project – EPIC for Bilfinger Berger Oil & Gas Company
 30m Steel Christmas Tree – EPIC for Coca-Cola International
 Mercedes Benz Workshop/Showroom at Lekki-Epe Express Way - EPIC
 EPIC of Damaged Expansion Joint on Muritala Mohammed Bridge at Kotan Kaffe, Kogi State – FERMA (Federal Emergency Rehabilitation & Maintenance Agency).
 Design & Development for the Proposed ten storey office complex for UBA (United Bank for Africa) Abuja, Nigeria
 Design & Development for the Proposed office development for FSB International Bank PH, Nigeria
 Renovation of Kwara State Government House, Kwara State - Nigeria
 Design & Development for the Proposed Ultra Modern Oyingbo Market, Lagos Nigeria
 Proposed steel renovation of Embassy of United State of America, Lagos Nigeria
 Mini Water works at Ushi Ekiti – EPC for OWENA
 Construction of Drainage Systems & Erosion control works – OWENA
 Adebola Shopping Mall at Isaac John Street, Lagos – EPC for Fototek Nigeria
 Renovation Works at Onikan Stadium, Lagos Nigeria – Lagos State Government
 Road Network Construction for Gwarinpa Housing Estate – EPC for FHA (Federal Housing Authority)
 Massive Structural steel roof construction for TREM Church, Gbagada Lagos
 St John's Church roof construction project, Port-Harcourt - EPC
 Involve in other numerous designs & development for various On-shore, Off-shore, high-rise buildings, and other structures.


________________________________________
EDUCATIONAL CREDENTIALS

PGD Civil Engineering, 2005
Federal University of Technology, Akure Ondo State, Nigeria

Higher National Diploma HND in Civil Engineering, 1998
Federal Polytechnic, Ilaro Ogun State, Nigeria

 Project Management Professional (PMP) Certification in Progress
 MEM Master of Engineering Management – In view

________________________________________
TRAININGS/ CERTFICATIONS

 Training on use of Staad Pro. For structural Analysis & Design
 Training on use of SACS for Offshore structures design and analysis for fabrication, installation, operation, and maintenance of fixed and floating platforms, vessels & wind farms.
 Certificate in the use of PDMS (Plant Design Management System) for structural modeling from AVEVA Cambridge UK & LONADEK Oil & Gas Consultants Nigeria
 Certificate in the use of AUTODESK INVENTOR PROFESSIONAL software for 3D Mechanical Modeling & Design, Simulation, Tooling Creation etc.
 Certificate in the use of COMPRESS software for Pressure Vessel Design to ASME Section VIII Div. 1 in Codeware Sarasota Florida, USA
 Certificate in Project Management based on the Project Management Institute's (PMI) Body of Knowledge Guide (PMBOK Guide).
 Training of Accounting for engineers.
 Training in basic health & safety in Oil & Gas environment
 BOSIET training for offshore survival
 Pursuing PMP Certification.


________________________________________
PROFESSIONAL MEMBERSHIPS

 Member of Nigerian society of Nigerians (MNSE)
 Member of Nigerian Institution of Civil Engineers (MNICE)
 Associate Member American Society of Civil Engineers (AMASCE)
 Reg. Engr. COREN (Council for Regulation of Engineering in Nigeria) R. 24,117
________________________________________
Date of Birth: 26th April 1974
Languages Known: English, Yoruba (Native)
Nationality: Nigerian
References: Available on Request

LinkedIn Profile: http://www.linkedin.com/profile/view?id=110642478&trk=hb_tab_pro_top

------------------------------